Separate names with a comma.
It gets cold up here in the northeast. The boys need more jackets. At this pace they will need bigger closets.:) Congrats. T.
Congrats,great job guys! What you guys won't do for a new jacket.:D Tom
Mike, a .010 push on a "M" bearing would not show any push on a "V" bearing in my opinion. If you get a .001-.002 push on a V you are hitting it...
Will, Tasca is in Las Vegas testing and will head on to Pomona. Try a search for Tasca Ford in Rhode Island when they get back. Tom (stuck in...
The number that I posted were how I do heads with 9/16 tops and 1/2 bottoms and has worked fine in both cast and forged blocks. The outside-in...
Sammy,I bet you are going to get 10 different answers on this. What I do: torque all to 70lbs outside in top row first. (except inner studs)...
A question: The titanium hub seemed to cure the hub galling issue. What would titanium pushrod cups do?
Hawk, the 8971 has the top fuel limiter in it, the 8973 does not. Go to this page: http://www.msdpromag.com/downloads.htm then go down to...
I believe the software can be downloaded from MSD's Pro Mag site. Then you can play around with it to see how easy it really is. I think NHRA...
Bad magnet on the crank trigger? Try closing up the gap on those two cylinders. If it pickes them up, change the coil ,but my guess is a weak...
Whosyourdady: on your 4s check to see if the pushrod is hitting the rocker at full lift. You will see a witness mark on the rocker. If so, you can...
If you can get 5 Brad blocks next week...YEP...you could sell them.
Mike, other than the rear main, #2 usually shows some distress before the others as Randy has mentioned. In older blocks or if left in for a...
Josh was that 6600 during a run, on the dyno, or on the jack stands? It makes a big difference.
At what rpm is it making 22 pounds of boost? Under load or not?
Double check with Titon, but as Dave said we have started with 24 volts with the same starter and a 44. Only put 12 volts to the solinoid. Keep...
Well Gainesville is a college town after all Dan.
Big congrats to the Tasca team on their first win. Good job Ralph. Hey Scott, you missed all the fun, at one point I had 90+ degrees and 120...
I believe all the Strangler chassis' of that era were built by Chicky Brignolo. That would account for the similarities.
http://www.hotrodder.com/sstarfc/picketcar.jpg http://motorsportunderground.com/NE%20Match%20Racing/Pages/Boston%20Strangler%20pg2.htm
