Separate names with a comma.
http://www.rbssuperchargers.com/Products.cfm?pn=7003-0004C&pID=8035 pete jackson can work on the other side of the hat
vent too small i would do the glug test as Will explained. Your vent should be able to replace the same volume as your pump supply but a -8 vent...
barrel valve setting with the air connected to the leak down tester set the right gauge to just on the zero,if you adjust the knob either way it...
Torco v brad penn Were not throwing it away each run but drain it every pass and fill with another 20 litres,each 20 will get about 3 passes on...
Looking for some feedback from people using torco tr-1 60 in blown motors.Always run a blown chevvy and had good luck with brad penn, but its...
Had the exact same with a sm1V, rev limited at 6000ish with fie etc when set at 7800rpm, triple checked all wiring and insulated and shielded...
Just converted to one of these from a drop out centre and dont know anything about them. Information seems hard to find on them,dont even know how...
clutch thanks for your replies,Don if you would email me a pdf i would really appreciate it. Maurice Fabietti is a big doorslammer racer over...
Is there anywhere i can read or learn abit about this clutch setup? I have bought a 3 plate 10" pedal clutch but would like to know more or learn...
jetsize What is the latest version number. I have version 1.73 which says win 2000/xp and vista on the cover. My laptop has just died and...
Thanks. I will assemble it this weekend.I previously was running a crank hub w/out bearing support. For removal I had a round 2" thick steel plate...
Just wondering how you guys pull the crank hub on a bbc with bearing support. My normal balancer installer isnt long enough to clear the hub...
The merlin 111 is really only a new block replacement with better than factory tolerances.The merlin pro block is a totally different block and...
I think that snap on driver is actually a screw driver without impact.It has a free speed of 375rpm if it is the same one I have and 7.2v.
ken lowe makes an over centre bracket that fits on the fuel shut off.It is on his web site in 2 sizes depending in whick fuel shut off you...
How about promotional start ups for sponsorship events.Without actually driving car but starting motor do you count this in the rods life cycle....
Just wondering what master cylinders the guys with funnycars are running.I have wilwood front brakes and wilwood 4 pot rear brakes and was...
One other thing to consider is the msd stuff is great but the power it produces is very hard on caps and leads.Some of the door slammer guys over...
thanks for your replies.I think I will leave it empty.My main worry with the heads was heat dissipation.Bought heads 18months ago before deciding...
I have just purchased a new merlin pro block for my 540bbc and I was wondering if you guys fill the water jackets on these blocks.The block is...
