Separate names with a comma.
Are you trying to seal out noise or fumes, or both? If you want to seal out noise, have you thought about using the same material as that stuck to...
Yes, I took mine to a motorcycle shop as well. Let me do it myself. Too easy.
Definitely. I made some steel ones and chromed them for our old FED. Lining the first 100mm or so of each pipe with heaps of grease stopped them...
Shouldn't all of them be a maximum of 75mm since that is the minimum height for the front of a car, from the very front to 300mm behind the centre...
Push Greg, I've set mine up as a push, because there is momentum to help push, it puts the push rod closer to the floor and therefore further...
No. Piston design is a real science, but basically the ring package needs to be as tight as possible, and as close to the top of the piston as...
As Marty has said, everyone's different. However, lower static compression ratio will give you a larger tuning window. Some folks may need that,...
William, There are lots of threads on this web site that have lots of information, more than you can think of asking questions about. May I...
Torque = Force x Distance Gentlemen, A torque wrench (TW) adaptor is very handy and can be used in a variety of ways. You can use it straight...
Agreed. Ignition is one area you DON'T want to skimp on, and as James has said, you'll get reasonable coin for your 10 and that will offset the...
Could there be a restriction in that line somewhere, like the fittings or something? What size line are you using for the return? Paul.
It really depends on what you want to achieve with it. There is another (older) thread on here about placement of the sensor and what it's results...
Thanks It's disappointing to read about this. I'd thought WJ was a better person than that, but obviously not. Sad really. I've looked at a...
2k I've got one of those. Nice little unit (for the 80s), but it can only print to it's printer, and is limited in it's usage. I've searched...
Cross Section of O-RIng Hi John, This might sound silly, and you've probably already checked, but are you using the correct cross-section-size...
Why do you ask? Is this a new setup, or do you have a problem?
That's funny, we had a set just like that in Possum's FED when he bought it. I replaced it with 4.29s, but can't remember what happened to the...
Use a battery drill with adjustable torque settings. Very cheap and very common. Get two...
A high-speed lean-out is used to take away fuel at high RPM when the efficiency of the intake system falls off. As Ron says, it's primarily used...
Brilliant!!! I'm gonna spray the outside of my grocery-getter so I never have to wash it again! :D:D:D
