Separate names with a comma.
Shouldn't your phasing be an average of run and retard? eg runs at 30 and you pull 10 in hi gear. Then phase the generator @ 25. ?
Mudwrench: silicone bronze with argon not brass with acetelyne
Have belly pans replaced buckets in alkyFC? or do you need all three diaper, bucket and pan?
Gas tank and frame clearance
Just welded some Chevys'. The jessel saddles are made out of hot rolled mudalloy. I ended up brazing them!
Pm They must remove the shocks to remove the tires! With a solid mount they can't get them off! Happy Thanksgiving to all!!!
Jesel quoted 29 hunnered and you gotta send your heads in.
Nope a bantam has scalloped door like a 53/4 corvette or austin healey 2000. This body has a rear deck like a 32 hi boy. Austin has a spare tire.
I'v seen an altered body I like but don't know the manufacturer. I believe it to be a 32 ford roadster with a dragster wind screen and small rear...
Mkr 588 Indy cyl head makes a spread port manifold for (pontiac 18* & 14*) in 9.8 &10.2 deck standard blower and set back and a couple for real...
Bolts Coast fab in So.CA. info@coastfab.com (714) 842 2603 sells small quantities of MS 21250
I would think precision is more important than accuracy. Espacially if you have collected a lot of data
Strange makes some alum and steel ones that have adjustable height. The tradeoff is an increased scrub radius.
Plates Pluegers' got the honges And Mark Williams has plates.
L over D Gonna try 4.25 with a 6.7 rod. Does anyone know what the valve to wrist pin clearance should be?
Hat? Gibson Miller TF
? cr.? 32 deg @ 40 psi and what compression?
M3? M3 ' you'll get less fuel consumption over the weekend , 40gal to 25gal '....... 'no jetting changes needed' ???????. there is one way to...
Advance IDK I'v got a brand new combo similar to yours: 540 kb with 18 deg all solid under a Lf 14 hh at 28 over and 11.7 pistons. I gonna try 29...
Blower limited? 30 over is 30 over and that's all ur gonna get
