Separate names with a comma.
When you research what cylinders heads will be the best for your NA engine there is all this info about things like cross section, air speed,...
What are the thoughts on coatings for pistons and combustion chambers/valves?
As far as I'm concerned the dyno is the best and quickest way to set the ignition timing. It appears to me ignition timing that makes the most...
Its the never ending quest for more power. We are limited to 43% over on HH 8's, BBCs with conventional heads.
Yeah I hear ya but I'm assuming if the rear one is drilled thru than the other mains are also hollow?
That's the kind of stuff I'm wondering, what about the "2.400 legal stuff" is it that makes more HP in that situation, is the air speed better...
I assume you're talking about the hole drilled thru the main journals? Are blown alky guys using cranks drilled like this? What is the...
What do you think are the most important performance features, such as; -cfm -intake port cross section matched to rpm and cid (what air speed...
In a blown alky engine, any idea what kind of cfm is produced coming out the blow by tubes?
Patrick Hale Is this the kind of information talked about in Patrick Hale's weather book?
We run HH8's limited overdrive on BBCs, but I'll give my thoughts anyway. This season our density altitude varied by almost 5000 feet! So its on...
I'm not familiar with C&A bearings, but King Allecular makes 3/4 groove bearings where the oil hole feeds the groove which goes about 3/4 of the...
I was looking for temp measurement and wanted to watch the level during dyno runs, all very quickly
Is anyone running something like this...
All of our engines have had larger port nozzles in the front, with all our different intakes we've tried, but all of our blowers have been high...
I assume you guys are boosted? Are you using EGTs? What diameter, 3/16 or 1/8? Fast response thin wire style? Do you use O2 sensor?...
