Separate names with a comma.
I thought the hemi mains were 2.750, same as chevy? What makes the snout stronger? Our BBCs have the hemi 3/4 NF bolt
Are you guys seeing good results from using crank snout supports? like this http://www.rbssuperchargers.com/Products.cfm?pn=2310-0002F&pID=6416
aluminum rods and higher RPM, like 9000 RPM = .060" no less
I used to always use silicone, it seals well and is reliable, it just stinks assembling/dissembling because its slow. I did an engine for a...
Do you think that an ignition timing that has been optimized for a -9 would need to be changed (for max power) if going to a -10 or -11?
Do you run -11 in your engines?
Now I want to throw extended reach into the mix. Is there any chance that colder plugs or extended reach could change the ideal ignition timing...
roots blown alky all out 30 psi chevy Can we run too cold of a plug? What are the goods and bads of -9, -10 & -11?
Do you guys weld titanium in a cabinet?
Did you figure out those numbers on a dyno?
I never had, I'm not saying its right but... What kind of ill effects can be happening if you don't back off the racker arms?
I have heard of guys using a setback plate with a delta opening and thinking it was doing the same as a blower outlet that is a delta opening. I...
I'm looking for 1512 hemi rod bearings, except I'd like .020", are they available? I have stds, .010" and it looks like .030" are available,...
Patrick Hale's weather book explains what you are looking for from the technical side of things.
Can you measure what o-ring groove dimensions you have? Can you measure what o-ring groove dimensions you have? This o-ring is a Ø.139" cross...
He also mentions the flowbench, is this a "normal" flowbench like a Superflow product or is it something Brad built?
cam cores & lifter bores 70 mm cam cores and 1.095" lifter bores! I assume this is larger than what they had been making What are most people...
I'm trying to do this to Dart BBC heads which are made to use a intake gasket (like normal) so I also need to make up for that thickness that is...
TADHemiracer Thanks for the .030 stick out measurement, thats more than I have been doing on the intake to adaptor plate and blower to adaptor...
Have you ever had issues with the machined surfaces of the head and intake not matching well and consequently having a boost leak?
