Separate names with a comma.
We've had everything from too much cam endplay, too much distributor shaft/gear endplay, hold down clamps come loose, spiral pins partially...
Seems like this would retard it, but maybe not...
Yep, that should work just fine. Hey Richard, are you sure your crank is not broke, causing things to come loose? or the clutch is out of...
Chances are 50/50 that you'll even be able to use it after its straightened because it might have a twist in it. We had one across a Cam Dr....
None that I'm aware of, I use socket cap screws (aka, allen head) and cut a L wrench shorter so it fits behind the front mag drive gear. I don't...
I have been blue loctiting them for several years and have had 0 issues.
I believe this is true for any points mag, like Vertex, Cirello, Mallory, etc
Wow, on one of our engines we worked our way from 36 down to 33, and in total we were 70 HP gain in power. Shows how similar engines are still...
And it kept gaining power as you advanced it?
Apparently the timing wasn't optimized on the dyno? If not and it were mine, I would put it at 28 and this winter I would dyno tune the...
In my BBC experience, -36 degrees is too much for a supermag and way too much for a MSD, which do you have? -you don't need receiving grooves...
Is this a new engine?
Thanks for your info!
I thought the point was to get rid of the washer, at least that's why I wanted to do it? If you have these inserts in your heads, can you reply...
http://arp-bolts.com/kits/ARPkit-detail-b.php?RecordID=941 What is the norm for installing these? Does a guy drill the cylinder head to...
Is anyone using the head temp as a way to tune? Such as the hotter the head after the run the leaner it was?
I have a like new Milodon for $500 I emailed you 605-413-8719 c
We've done this many times in our BBC's before we traced the issue to clutch imbalance. There are many places "clutch imbalance" can come from;...
What kind of tricks do you know of that make it easier or quicker when changing bearings while the engine is still in the chassis? In...
I've gone from three disc back to two disc. Bolts, stands and the disks are all I can think of. In my case I used a different length candlestick...
