Separate names with a comma.
I have some of those; I looked when I had a bit of time over the last week or so and finally found a bin box with some of my remaining fuel system...
Thank you so much for your reply, I would be right on those if they were 4.690 OD as that seems to be what this block uses. The ID would be just...
Thanks Robert, I will do that if I get down to just buying a new set; I was hoping to find some used a bit cheaper although the shipping is a real...
Looking for a set of sleeves for a short deck KB street block. It has dry straight sleeves which are about 4.690 OD which seems an odd size to me...
Yes; we had 2 small stand all ti clutches; all ti components.......hats, doughnuts and flywheels. I think one is still sitting there but I believe...
Tighten up an 8mm like a bow string and it will stop breaking the belts. Jeff J
Thank you so much Chris for linking the video for me; nice to have skills way beyond what I am able to muster in the computer department although...
Pretty slow on drag racing and I saw another similar thread here so thought I'd post a link to a run we made at Port Albernie BC. This is an air...
Chris; thanks very much for getting these racepack screen shots posted for me. Hope they are useful to the discussions on this topic....
I was looking at the discussion on this thread and was interested by it's direction and it served to remind me that I had not been able to load...
Cut the gaskets off; Cut The Gaskets Off... the plugs seal perfectly on the spark plug tubes. If you leave the gaskets on it will destroy the...
Well I used to run TA/FC with a Pluger dry sump pump which has the pan scavenge section and the pressure section. I did not monitor pan pressure...
Well, you should not be running it with leakage like that but that said, a static leakage test at say 100 psi is not the same as with running...
Tried to upload screen pictures but it says the file is too big for even one.....so I guess data is the best I can do. Will???? Norwalk Q1...
I picked up the computer and only had time to pull up a couple of files so I did Q1, we were #1 qualifier @ Norwalk 2013 and 2 weeks later Q1 and...
I was referring to PSI when I said minus 1 1/2 to 2 at the finish line. I used a pressure transducer at the front of the lifter valley to get...
If your short block is correct... you do not need more than the 1 1/4 tubes. I would see from zero to 1 lb @ 6500 stage and zero right after the...
The compound gear sets use a case and shaft that is, I think, just over an inch longer in total. Hugh Ridley has 2 front cases, 2 shafts and 2...
Well, lets see; What does the driver want? (Winning)Runs in the car. What does the tuner want? (Winning) runs to sharpen the tuneup. The owner...
I'm not interested in any kind of on line conflict but thought I'd just observe that a blown alcohol car can go quick without killing itself and...
