Separate names with a comma.
If it is a TFX pan: I went out and measured a billet pan rail we had cut years ago, but the prints were not at the mill where they hung on the...
Reading I know a runner up is not as good as a win but .005 light I think you ran your fastest ET to date in finals .61 all during a memorial...
The Tigges gang are some good people!
BUT... the TFX 92 block the pan rail is 1 inch wider than the 96 and up looks the same but wider 96 and up is same as normal hemi
Tim Where you getting this stuff?
Ok talk to me about the Gibbs I have tried just about every thing out there even bought a bunch of the worthless boesheild t-9 that was raved...
Never been a big fan of MSD's pickups, as the one in the pic is not shielded or grounded Give Dave Leahy a call http://www.electrimotion.com/
Marty not really that hard to work on once you do one. most the parts can be bought from RCD or RBS turn the armature, scrape the mica between...
Winberg is a sponsor here, I can tell you when Bryant gives you a date they will make the day they say or sooner, if it is not on the shelf!
scotch brite and motor oil seems to work the best scuff it clean wash it with solvent then give it a thin coat of oil
Nice job Guys
We have run brooks, BME, Howard’s, C&A over the years and have been using MGP’s for the last 8 years now, they are best rod out there bar none, I...
yep what brandon said
Did you check the keyway on the bottom of the mag sometimes they shear
Congrats Chris and all the guys standing behind you. Had to be a great feeling. Starting line will never be the same with Will jumping like he...
They are prediciting 6" of rain for Sunday Hope they have a fleet of tractors ready to pull everyone out again, think i'll pack a raft for this...
call Veney he should have them
What is the pressure section of choice 1.100" or 1.375??
MSD makes a small one , little pricey http://www.msdpromag.com/pdf/frm22607.pdf we use a gel cell from trash shack similar to this...
Where were the cracks at i always found mine in the fork from the bolt hole to the outside
