Separate names with a comma.
More questions: At what rpm is the motor turning before you try to "arm" the mag or are you trying to start it with the mag on? Yes the mag and...
http://www.ebay.com/itm/L482-Integrated-Circuit-x-1-pieces-/160937370420?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item25789d6334
drill and wire them to be safe
These are only $45 for a makita http://www.afineredgemfg.com/
I have not had the car out yet this year so my voice may not count: I still think 1 run on Friday if you choose or not, and 2 on sat are best,...
Sent you a PM
....rcd....
we do it with Weld rims that are made to do this with out tubes no problems
I see you added port nozzles, by chance did you use the same type as your hat the ones with the small hole in the body, ports need to be solid...
If you want ISP call Kris VanGilder @704-455-3060 email kris@ispseats.com He can walk you thru what you need to do Not hard to do you...
there is no clutches but yes it needs grease in the planetary assem sounds like a keyway sheared, one gear assembly is welded in them
Justin How small are the Pro Stocks down to now 8"?
liquid CO2 is filled by weight not pressure use scales to measure weigh bottle empty then weigh as you fill bottle should be marked for capacity
Happy Easter to you to Eli and yes he did!
Amick (800) 445-9456
go to the welding or gas suppler get a co2 bottle like they use for soda fountains and beer have them put a siphon tube in it this way it...
I am going to go against the flow here and say Firefox most all the big show cars run this you trip them and need to borrow, run the same as...
You need to get the copper a couple hundred degrees above recrystallation or grain growth 900°-1100° to get it to go dead soft, bring temp down...
my 2 cents MGP I have ran them for many years without one failure, i have done some really stupid things to them but have never had a...
Are they in a mine shaft, seems to be a lot of 5.50's going on down there?
