Separate names with a comma.
Could be the snout on the converter isn't concentric with the pilot .
I always indicate the converter snout and find the truest position then match mark one ear of the converter and flexplate so you bolt it back in...
I had intermittent start problems for a short time and it turned out to be bad stator windings in the mag .
Ever hear the old phrase ?....... You get what you pay for!
Meziere! I have one of there first 24v units and its is a work of art and it has performed flawlessly ! It has incremental adjustments for...
I run R&R rods . Have run them 75 passes with 0 issues ! I have friends that have won ADRL pro extreme championships with them . Great service...
Here is some food for thought...Hat and port blocks are drilled 90* fittings, should they all be reengineered ? If the volume and flow rate going...
I have to agree with Mike that a hard 90* will cause a restriction in flow but as long as after the 90* it flows more than the nozzle it's feeding...
It seems light on spring pressure to me , is it titanium or stainless valves ?
Any chance it could be valve springs ?
Originally you posted I would like some recommendations for a inexpensive weather station."" I do not need ET or any other of the drag racing...
I have been using the CSR units from Snyder and have had zero problems.
I have had one go bad and I was told that it got run too long and overheated it.
It's not an air servo or solenod problem is it ?
It's very easy to check , plug one side and put a gauge on the other, then switch it .
Snyder sells a split regulator to do exactly that.
Is anybody using the new Electimotion command module ? What are your opinions good or bad ? What does it do and how easily does it adjust ?
Call meziere and get one with a 24 v solenoid Awesome unit , NOT a restickered offshore p.o.s !
SSI in Ohio Rich and Tj are Great guys to deal with !
14-71 psi ERD spacer 33 % over but no limit
