Separate names with a comma.
I used to love the AHRA, raced it for many years. Unfortunately, when it was supposedly resurrected a few years ago, races were cancelled, and...
Also look for hot wires that are grounding to the chassis.
We kept blowing up motors because of lack of oil from the wet sump, the motor just flat ran out of oil by the finish line. We put an accumulator...
I definitely agree with Brandon
The burnt ground strap would have caused the panel to blow, which caused the engine to rev. The damage had already been done, the open burst...
How much timing were you running on the dyno.
I am surprised too. I dont know anything about this specific scenario, but when we went from a Mallory 5 mag to an MSD 44 amp, we went from 38...
You tractor guys can start it any way you want, I have had dragsters right beside me run over their entire crew. No way you can keep the car from...
I wouldnt run less than .004 with an aluminum block
Please DO NOT spin the motor with the butterflies open to watch for the fuel to come out of the nozzles. I have raced against a few people that...
Congrats John, it must be a great feeling.
Make sure the line coming back from the pan holds a vacuum; if the braided hose or the fitting is leaking, nothing will return to the tank
Maybe a leak between the blower and manifold. Is the spool in right, the engraved line should be between 12 and 1 oclock. Try richening the...
I find that when the rods are brand new, the bearings measure .006 clearance on the crank. After a few runs, the rods will collapse a little bit,...
I have seen this a few times in the GRP rods. I use Venolia now and don't have any problems. I like the Venolia bolts tool. I haven't used MGP,...
Should be ok, but get it re-charged every year. Also, an MSD 44 will be much more reliable, and will not require as much timing. Don't bother...
Did you want this input shaft, or should I put it on my shelf again
I have seen this after we actually kicked the rods out, it seems that some companies make their rods out of plate, and you can actually see the...
We lowered 1, 3 and especially 6 on the screw blower deal, but have never done it with a roots.
I like steel main caps myself
