Separate names with a comma.
What? What prompted that?
Congratulations Jirka Kaplan and Les Davenport on your TAFC win!!!
cc's We have the original style heads that were made in the seventies, and they are 190 cc's
A 2 disk is very difficult to run, you have to hang a lot of weight on it to get it to work, and it will still wear out fast. For gear ratios,...
If you have decent boost and lots of compression, I think you will still detonate hard. If you can't take compression out, drop the timing to 15...
Don't know anything about turbos, but sounds like severe detonation. The marks you talk about on the heads by the O-ring is the head slamming up...
I guess it depends on how much compression you are running, and boost. Typically, with a 44 amp mag, I would run a maximum of 28 degrees with a...
I believe the HP would be about the same, the ignition will just be more reliable, and it will run cleaner. How much timing are you running now,...
They take the same valve cover gasket as a standard hemi fuel head.
Thanks guys.
Just wondering if anyone has any current info on problems with titanium valves, which ones I should stay away from, are the heads suddenly falling...
I have run .060 piston to head clearance on my TAD hemi, and it ran real when the piston just made a light impression in the head at max rpm.
Dry sump is the way to go. You can temporarily alleviate the problem with an accusump, which will make sure you dont run out of oil when you are...
Sorry, Rod Saint, no James.
Maybe you could get Rod St. James on here to answer some questions, that would be a start.
Thats about the same clearance I run, no problems. Better than being tight.
1 inch off the ground, if it smokes the tires, raise them a bit. If it bogs and shakes, lower the bars even more.
I agree, put the wheelie bar down as low as you can, it will bring up the wheel speed and help the car launch properly. Your tire pressure sounds...
If it is colder than 65 degrees outside, and the car has been in the trailer overnight, I will heat up a pail of oil in the truck so it doesnt...
You can easily spend 15k on an engine that looks good. Car would cost about the same, so you should be able to do it for 25 or 30 K.
