Separate names with a comma.
Added picture link to the bottom of the post, enjoy!
It's funny how sometimes you go to familiar places & find faces you haven't seen in a while. New England Dragway is our home track, so it was not...
Added picture Link at the bottom of the report
Is this a brand new build or a recent upgrade to the Grid? What else changed? What does it sound/feel like after the shift? Is it rolling over...
For those of you wondering where Team Tigges has been, it has been a long wait, but we are back. It's been over ten months since we were last on...
I witnessed the positive side of this this past weekend at the New England Nationals. Walking through the pits after Q4 I congratulated Dan...
Three Point Carbide Masking tape on both faces (entry & exit) 3-5K spindle speed. Chris Saulnier - Team Tigges Mechanic Falls, Maine
Hi Dan- I've worked crew for Mark & Fred Tigges for the past five years. I was talking with Mark & we were wondering if you needed any help for...
Don't tell NHRA about that idea, they would assume the camera would be set to sense the yellow, then release the button on a pre-programmed delay....
Congrats to the Mercier Team for stepping up to qualify 13th in Top Fuel at the Dinwiddie Dump. Now go spank Kalitta in R1!!! Tres bon! Chris...
Is it literally just the bolt or the standoff & plate as well? If it is just the bolt head, maybe you could use an allen drive flathead of socket...
Thanks for writing. I learned a lot. Chris Saulnier - Team Tigges Mechanic Falls, Maine
Scroll down to the bottom of this VP FAQ. M1 M5 Comparison Make sure you check you sanctioning body's class rules to make sure anything other...
In other words, what is the thinnest rear bearing plate, so that the intake setback plate can maximize overall rearward blower positioning. Chris...
I agree hard is not necessary, but would continue to argue anodize of any type is not necessary if you are cleaning out your fuel system during...
I'd leave it bare aluminum, especially if you are cleaning the system between races. Getting full anodize coverage inside the tank is going to be...
Why no tubes in the liners? We run the liners at 50# with tubes (fixed metal stems). Set them and check periodically, they don't leak down. Run...
Loctite (red or green) works poorly in the absence of ferrous material, including aluminum & 300 series stainless. Use primer or XX3 series...
I just finished that book, I bought it to gain a better understanding of the details of how blown methanol engines work. I'm a crewguy with great...
Most RPM it should see... Just an observation. :) Chris Saulnier - Team Tigges Mechanic Falls, Maine
