Separate names with a comma.
Would the mt 3189 34.5x17-16 be a good set of tires for a blown application? Mt says they will but everyone knows how that goes. Most are only...
Hey if you still have the plans for the jacks you built send them to me if you don't mind. There are many ways around a patent. Trust me been...
Does anyone know if ray is still making the click fast barrel valve adjuster or not? I guess I have the right number it could be an old number though.
Andy pinkerton gets $400 or $450 plus stripping. Call him at holbrookperformance. And for those who hate Donnie Holbrook he hasnt been around in...
Lmao. I was wrong about the blower its an 8-71 Littlefield not 6 not that it matters much. I've got it at 10% over and figured out the pump flows...
If anyone knows someone who has either the old 3 rib style or other bugcatcher that's either complete or partial my buddy rod phelps is looking...
Is the bugcatcher still available?
Do you still have the bug?
Problem with corrosion x aviation is it does not dry. I got a gallon and tried it never dried even with forced air blowing on it in an 85° shop
Got tach working. Have to program it a little different its reading lower than what I know for a fact its idling at lol. Steady reading but not...
Mike canter redoing the bv seems to have fixed the ports opening. They were set at 15 before and now that rod leaked bv again its all good now....
I swapped #1 and 2 cylinder port nozzles. Went from 70 in 1 to 65 and 65 in number 2 and leaked b.v to 75% and it cleared it up a lot. Still have...
Hey mike canter the b.v. is set at 78%. Its just heavy at idle blowing fuel out the front pipes likes its opening the port check but it shouldnt...
Ok 526 tfx hemi, 14-71hh and 1100 pump fresh from enderle. Has a k valve with -8 feed. My pump saver is at 150 psi or there about. Idle check is...
I filed mine down flush. Make sure to put some pipe dope on the threads or it will leak down somewhat. Mine took a week to lose 2 psi though and...
Rotors have not been restripped. And the mag is vertex from Joe hunt. 4.2 amps
From trailer to show grounds. Maybe step on it a few times though lmao
Ok I got a racepak iq3 dash and wondering if the 230-vp-tach-4 rpm module is going to work with Mallory magneto or not? 2 wire hook up 1 is yellow...
L Lol #1 is 1st cylinder on drivers side which is the same as a hemi. Firing order is the same also. Only engine where #1 is on passenger side is...
And its iron head but will be getting a set of profiler aluminum heads before long due to its too hard to keep everything consistent being all...
