Separate names with a comma.
Just to be on the safe side have them dry clean it in the morning when their equipment is fresh.. Also when done take your suit, turn it inside...
Thanks Guys for your input I do not think it to be a lot number problem as i only have bought about 100 spark plugs in the last couple of...
I had over 10 spark plugs fail on a run, they tend to develop a crack in the porcelein from the cable end to the 13/16 hex nut . The crack apear...
Correct , also you dont have to disconnect anything because in reality a24 volt setup is just 12 2volt cell together . The 28volts that the...
Funny...but thrue:D You need to let it spin to make torque them lock it to make the car go.
Danny, I use West sytem epoxy every day for both Boat and car projects . I live in the tropics so I usually work at 80 to 85 degrees...
My S&W funny car had a two piece seat , it is a one piece back and side and a one piece bottom . It easy to work because to remove the thirdmember...
All I can say is what a clown , Puerto Rico has some good racers and better fans that knows drag racing in general but I know many racers who feel...
Well I have straighted mine at .010 to .020 bent at the head not on the stem . They sell a tool for it but i use a collet on my bridgeport with a...
That REALLY shed some light on your post!!!!!!!:D Take care marty we know is still winter cold.:D
Thanks for both the replys and time it takes , I really appreciate it. Well I do have both setups but was leaning to a beadlock deal. I beleive...
My mistake! I should have been more clear. We have run hoosier in both dragster and funny car The question is related to the promod as...
Hi i have been running a hoosier 34.5 with no big problems but to try I have a new set of gooyears 1430 36" . Has somebody tried this tires...
Hi , For what rear end ? Try TOMS rear gear He had a 4.56 10.5 that will fit strange ultra case for about 850 last year.
You guys are just too cruel!!!!:D Please don't take anything for granted , go to his WEB site and remove all doubt:rolleyes: He is like this...
Hi Danny If I understand what your are saying is that you have a hi speed that opens about 1.2 sec. Right? I have been running a whipple for...
An I missing the point here ? I mean, I went to his web site and found direction on how to get a $ 100.oo blown alcohol tuneup. Without sending...
Is your crank a new one or old ? I know for a fact that Bryants and crower (or any good hemi crank for that matter) have extra clearance when...
As has been explained here by Dustin , at that point they felt that goind thru the recertification process was not a good idea due to cost. But...
If you decide to run less overall area for your aplication what we used to do , was to take a standard 11" disk and cut its surface on aa lathe ,...
