Separate names with a comma.
Just a clarification IF you have an steel block it does matter to have a couple of .004-.005 because an steel block wont change as much as an...
Faulk unit also, no problems at all
My fat head 5 tall deck on a whipple blower had a 42 and 25 pulley with a 1750 belt trevor expect my call tomorow i need to talk to you .:)
When we started back in the 90's the nozzles where very diferent when the high helix came out , the retro helped a little and the plates even...
I believe you have an ISSPRO gauge , very good one also. Hey Trevor are you in Fl yet?
I have seen some people go to 4.500 , 4.490 but the most common is 4.470 also its pretty dificult to find parts for a 4.500 blown so beware.
Its very common to find rod sets with 5-8 grams variance between them but I would never grind on an aluminum rod . just match in pairs as close as...
It depends on the camshaft there is the 4-7 and the 4-7, 2-3 swap
Yes , but no matter what they both make us go crazy just by looking at them!!!:D
We where .02 quicker in the 60 foot with the two step, yes it did take a little bit less cluth But we weren't bypassing fuel to get our cylinders...
I was doing a brad 5 ,525 cuin with a 14-71 kobelco , it was about 12gpm at 8000 , we weren't bypassing fuel at the two step but as mike said it...
Congrats Will !!!! Enjoy the honeymoon like it is the last happy thing you will do..... :eek:Hope I didnt spoil what life will have for you:D
ASK ME why I knew!:D We all have done it
Danny set your rings in a flat surface ( glass) to see if they are twisted if ok then with the one you cut in half check to see if it glides ok...
Please go to ralph Gorr site under products flyers and download this link...
My last top alcohol funny car in 2002 had 56% with everything moved foward to keep the front down. It had the engine at 65 out and had usual...
Usually KB can trace any block by the number stamped on any of its mains, i had a block that was made in 1987 and Ken found the measures. You...
From personal experience in a TAFC: You lift as soon as you see fire engulfing your legs...Then you enjoy that full orange flames as your visor...
Yes, the master disconnect goes in the positive pole of batt #1 that way it breaks both the 12volts to the car and the 24 volt to the starter....
You will need 2 batteries , on the first one you connect to ground the negative pole and take your 12 volts for the car from the positive pole....
