Separate names with a comma.
Please send a copy to try carlospf599@hotmail.com
Well you can take out 12*15 deg if you are at 22*22 now and ramp them in 1 sec.. But you should also gear a gear eliminator shaft from lenco and...
Do you have a flowmeter?? I dont know about a converter car but in a promod cluth we usually are between 7.2 and 8.7 gpm at 4200-4400rpm.
Thanks for the clarification Still i took a friends blown chev car that was breaking a lot of turbo 400 put a bruno and a lenco 3 speed and...
No disrespect but I know the oposite is true a turbo 400 is a **** to turn even by hand hand and both a lenco and a b&j you can turn easy by hand...
RIP Mert , I was one of the many helped by you one time or another
so did he blame or thank ups for it?????:D
years back we ran a tad with std roots blower and same tire size as you. i personaly wouldnt put anything numerically lower that a 4.29 with that...
Ok, i have the vent plumbed right in the chassis so it goes the same way as the breather tubes. have you changed the vent and tested it? i dont...
Please check your pm
Our brad 5 hemi does the same thing. I welded a fitting and fitted a #6 hose with a quick disconnect end to the oil pan Then got a oil changer...
Pnuematic control if done by part trottle only will not get you the same boost as full open trottle on the limiter.
i understand that Will runs a very tight and respectfull ship here , but in this type of deals I wish we could get a name so next time this ......
Just take a little time and check it, it should just clear mine at 60mm cam will leave traces on the rods but no trouble right now.
I understand all clearances posted above where WITH GASKETS . Anyway we run at least .070 with .040 gaskets that way we can put 50,60,70 thick...
I agree with both John and Ken on this one What I do to verify clearance is turn the engine over lossen both rod bolts and with a dial gauge on...
I will second that too!!! I can't tell you how many stories i have heard about the brakes , BUT Randy's post clears some of it. Randy can...
Ok Guys please get me up to speed here I have never run carbon brakes I have run tad,tafc and promod the first two in the fives at 245mph the...
We just put a lot of rags and duct tape EVERYWHERE!!!!! inside the manifold. On our setup we can take the manifold and blower in one piece out...
Althought we never had "issues' while on the two step, when I started using it , I wouldnt have the car more that 1-2 sec on the limiter . The...
