Separate names with a comma.
with the automatic as some have already said and i have run that combo and back then there wasnt any way to knock timing out and the car nasty...
you go from a 3.89 to a 4.56 your car will be violent leaving and you will problley have to start knocking timing out so it will leave without...
welcome this is a great site
if i remember right someone told me when you down to a 125 thousands left on the hole put a new set on 60fts were still ok but down track they...
no shit who cares if you can write perfectly if you work hard to achieve something and you good at it you will get a shot some jobs just dont...
will they not recert a -20 suit to a -20 are recert to a -15
ta/fc sounds pretty good will all thats missing is the money screw are roots blowers
get a rotor fixture to hold the rotors and a dual gear pulling set AND DONT PUT THE ROTORS IN BACKWARDS other than that its fairly easy
good trade dont you think
to me the cost difference unless you have an endless amount of money and you searching for thousandths of second the fiberglass will work fine i...
i have a number 8 vent and it works fine 542 hemi 1471 littlefield 57 over i dont think a bigger vent is nessasary with you application and my...
has that block been resurfaced are decked put and 80* gasket on one way to check this put it at tdc using a dial indicator then un bolt the rod...
if there hitting on the outside of the dome just relieve the head little i used to run a veney head motor got it back from a race tore it down and...
the number of turns equal the amount base pressure (pressure plate pressure ) the weight on the fingers determins how much the clutch slips are...
msd has one has a degree tape for the mag and a pointer for the base held on with two screws you drill and tap the base
is 10 quarts enough i dont run a dry sump but the guys that i do know run more than that good luck
mark williams has a funny car kit that would work for keep in mind most kits dont come notched fitting tubes is the hardest work other than that...
some one may have said this already but check the screen in your filter you can go from 120lbs to 60lbs and think WTF and all it is that screen...
mitch ford in evansville in he does a lot of pro stuff for years can do any kind of mag are dist.
i run 6.5 lbs with the bead locks
