Magneto Mount

Discussion in 'PSI Superchargers Tech Questions' started by Adam Culpepper, Jan 10, 2006.

  1. Adam Culpepper

    Adam Culpepper Small Fry

    Joined:
    May 10, 2005
    Messages:
    17
    Likes Received:
    0
    ive got a small ford that i need to mount a mallory mag on and the blower doesnt leave room for the "usual" spot. ive got an external belt driven wet sump pump on the side of the engine that drives my enderle pump off the back of it.

    what i would like to do is mount the magneto facing forward, like you would normally mount a fuel pump. does anyone sell any adapters that allow you to mount a magneto head on a fuel pump extension? ive seen the rdi offset drive and the lowe stuff, but i was looking for something a bit more basic and (hopefully) alot cheaper.
     
    #1
  2. Alkydrag

    Alkydrag Sr. Dragster

    Joined:
    Dec 24, 2003
    Messages:
    351
    Likes Received:
    1
    I don't have the number off the top of my head, but I think Blower Drive Service has what you need. They are in Whittier, California.
     
    #2
  3. shomethemoney

    shomethemoney New Member

    Joined:
    Mar 10, 2005
    Messages:
    19
    Likes Received:
    1
    Dunn Offset Drive

    I'd check with Mike Dunn on an offset drive, would not be real expensive.
     
    #3
  4. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    offset drives

    hi adam we sell offset drives for the mag check us out at www.rbssuperchargers.com look under mag drives and acc. another option that can be resonable is to look on ebay or other website for a enderle dual fuel pump drive and with minimal machine work you can run two acc. of it good luck and if you need any help let us know thnaks jr
     
    #4
  5. Adam Culpepper

    Adam Culpepper Small Fry

    Joined:
    May 10, 2005
    Messages:
    17
    Likes Received:
    0
    rbs, do you offer a drive that would fit a 9.2 deck ford?
     
    #5
  6. QtrWarrior

    QtrWarrior New Member

    Joined:
    May 28, 2005
    Messages:
    7
    Likes Received:
    0
    Adam,

    Check with DblA.. He might be able to hook you up with something that you might be able to make work...

    Mike
     
    #6
  7. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    call Mike Dunn, he is the only person that can and will....that guy is the goo roo of mag drives. That is the only drive I will use, if you need his number let me know, he lives in texas. give him a call you will be very impressed he won't hurry you off the phone and he is such a brain at this stuff...good luck
     
    #7
  8. Nathan Sitko - 625 TAD/TAFC

    Joined:
    Jun 24, 2003
    Messages:
    725
    Likes Received:
    1
    You could call my grandpa in California, George Sitko. He builds mag drive and other components for a living, he's done several front-drive deals on chev's,hemi's, etc. 562-243-0482
     
    #8

Share This Page