Separate names with a comma.
jay@mhpmachine.com Jay Erschen mhpmachine.com
Was the cam or its timing changed? "Twice" the boost and won't touch the plugs doesn't jive but if the cam was moved it could make screwy numbers...
Regardless of what process or who does the repair you should verify all oil passages are free of repair debris or even welded closed. Best way to...
I have knowledge of only three units that have been around for a very long time..... Fred Mandoline IL Gary and Steve Rettel TN Either Walt Austin...
Anyone had a 9.5" motive ring and pinion failure? What was the application by weight/power/clutch or transbrake? They are Italian made and...
irony...... it's funny to me that user "critical mass" would respond in such a way but the Newberry stuff has so much mass (weight) compared to...
more on mag bases mallory went through the trouble to improve the base around the transition from the shaft to the base area. the old...
a good read http://www.sme.org/cgi-bin/find-articles.pl?&02fem072&ME&20020204&&SME& but, my opinion is, unless you're alan johnson you have...
oil pump is likely..... I had to move those bars on a car that was converted from a fontana to a chrysler style block. The debate was then "do we...
time/rpm shifting your b and j Not trying to hijack the thread but relevant would be who sells a shift solenoid valve rated for the 400#s it...
top oil? While running a TFX block and Plueger pump a modification was made to the lifter galley to improve the return of oil to the pan. If you...
