Separate names with a comma.
Thanks! Thanks for everyone's input. I promised myself back in college that I would have a 9 sec car that I could drive to work whenever I...
mobil 85-140
I went from a typical 8-71 Bowers 18% OD on a BBC to a 14-71 BDS Pro Charger I got the blower used, I modified it a little to work on my...
Educate me. I don't know much about competition blowers, why are fuel blowers undesirable?
More of a question than an answer: Doesn't this also require an RPM consideration? The load on the crankshaft from 900 hp NA @ 9000 RPM may be...
Does the length of the top opening on a 14-71 affect its performance? For example, if the opening is 10" long vs 15" long, is the smaller...
What about Snow performance type meth injection under the carbs that only operates under boost? This is a pretty common LS1 trick to bring down...
I am not sure how much boost it will make at 30 over, the 8-71 with a smaller roller cam made 12 psi @ 15 over, and still made 12 psi@ 18 over...
Perhaps your local machine shop is building turbo LS1 motors using MLS type head gaskets, these are working well on 400 inch LS turbo street...
Some info on my setup Here is some info on my setup. Tall Deck 427 block 4.310 bore deck cut .045, o-ring, .035 copper gaskets with hylomar...
Please help me understand a few basics about race blowers. 1. Do the white strips wear out faster than the black strips? 2. Is it correct...
Milling out the top opening??? I think I want to mill out the top opening so that i can fit three AFB 750's. Is that a really bad idea?...
More photos [IMG] [IMG] $1100 Not the cheapest I have seen, but I met the guy a few years ago, he is pretty cool, and I have a friend who...
