Separate names with a comma.
I run 572 grade 50 on my top fuel bike. I have the floaters cnc laser cut, then finish stand slots on the mill. Next step is to have them...
Check the drive to the pump. It may be turning without load, but drive may have rounded the corners or something similar and won't turn the pump....
I run a top fuel bike with a double bar. I find that the bars need to be adjusted correctly from side to side to make the bike run straight. In...
I run a top fuel bike. I run a double bar setup and have found it has to be set just right side to side to not steer the bike. This thread makes...
I've been using assembly lube to help putting hoses together. It's amazing how much it helps, and doesn't take much.
I just changed lights on outside of trailer to LED. 6K onan would quit when the compressor kicked on with the two outside halogens on at night. I...
Jeffj, curious as to what you are running on the scavenge section of pump. Is is a roots type pump or gear? Some of the pumps now have a roots...
I've run as high as 14 1/2 -1 on an injected deal at 100%. Blower set up should be about 7-1 max, maybe a little more when running lower...
I'm running blown fuel in my bike and just set up the manifold for a thermocouple. I'm running 45 # of boost and 85% nitro. Was wondering what the...
I have a new set of pistons on order from CP. Somebody dropped the ball on the order and they are remaking them. I was talking to a good friend...
I run a top fuel bike. If you look at almost any top fuel bike you will find a 14 x 31 MT. I don't know what the difference is. I have seen...
Apparently there was also a different company by that name. They were originally in New York and built CNC milling machines. I appreciate your...
I've been going thru old posts and have worked my way back to page 138. There was a post from a member listed as Blownjet13. He worked for or...
Andy, are you still working at Littlefield's? Many years ago, I used to do the chapel services at the division seven races and usually talked to...