Separate names with a comma.
thanks for pointing me in the right direction!
Thanks for your answer ! Andy plug reference and gapping?
hi all! are taylor thundervolt 8.2 wires ok on a hemi blown alcohol application using a supermag 5 magneto and whipple screw blower? what are you...
thanks for advice.
thanks for advice! looks like they are the same as the old blue KB.
Just double checked:not a crack,but a scratch. thank you for showing me:i double checked the whole batch.
here is my current setup.after installing new manton pushrods(without taper)and a little grinding in the pushrod holes,no more problem,and no need...
update on my clearance problem: after scratching his head for too long,my engine builder calls me and asks if the lifters are new."yes" i...
yes,that's me!
setup on pic has been replaced by brand new parts that helped correct geometry but pushrod clearance issue remained. i just called Manton as...
This is a pic of the setup on the engine "as bought",and the pushrods that were included in the deal were not on the engine so as to release...
this is a stage 6 kb block,standard deck height and camshaft location with 904 lifters. pushrods barely rub on tubes on the intake side. and i was...
hi all! my engine builder is having the following issue: on my old brad fuel heads,i installed new stage five rocker arms and new shafts. pushrods...