Separate names with a comma.
This makes a great deal of sense for us, we are using the same block. We will look into this. Thanks Frank Jerzy
The lifter that failed has a hole just next to the lifter without the hole, Have not been able to get to taking the rest out yet. Kind of pissed...
Last Pic. [img]
Two more pics [img] [img]
We put a new lifter back in the hole and no clearance problems the bore is scratched but we have not run it yet. This happened Sunday,
You cant see in the picture behind the galling was a definite brown spot from heat build up. I will post up more pics in a bit of the bad lifter....
The lifters are .800 can't remember exactly but they are not the .9 ones. Rocker ratio 1.75 intake, 1.65 exhaust. The cam is a Carol Carter spec...
I should have shown you a photo of the back side sorry. There is no hole in that lifter at all! That lifter is solid every other lifter we have...
The oil restriction hole is fine as per IDT specs oil was not found on the number 5 exhaust rocker. Look at the picture closely and you will see...
No, the valve spring was not compressed as much as the rest during the post starting check. Then it was discovered that the lifter was stuck in...
Here is a pic of a recent problem in our engine. Can some one point it out? [img] The lifter on the right has failed only on the top half....
We have some KIP Inc, valve # 6X321 12 vdc ( 450 psi stamped on tag). This company is in CT. These valves can be used in your application. We can...
