Separate names with a comma.
we run a sb in a ta/d and have a psi "a" and it makes 55 lbs and sorry i think the engine is very reliable, we strip it after every event and...
Just wondering if anyone has tried vac-pumps or dry sump pumps which create a crankcase vacum back to back with and without on a blown engine. I...
we used the 2 peice gapless 2nd rings and had no end of trouble with our SBC TAD and the thing used to pressurize the crankcase big time and then...
the previous owner (Mark Brew Queensland Australia) ran a 5.87 @ 231 some 10 years ago in this car with a santos sbc so with whats around these...
we run a SBC in top alcohol here in Australia as our rules still allow them and we do use water to maintain even temps especially around the...
the only ones i have ever found were for the water to air intercoolers but they were stainless and around 6" long (BDS), dont know if they have...
Bill The info I have says: Model 206 "D" This supercharger has external ribbing on the sides and rear of the housing. The snout has 12 bolts and...
i think he meant an internal leak and yes i have seen several that dont seat 2 of which were new, i've owned and operated our Fuel bench for a few...
Hi Jamie, we race a Rodeck/Brodix SBC in a TAD and we use a billet aluminium pump. I found it to be very reliable and any new similar combo's i do...
Do you run coolant? Ours was a Rodeck/with water (Now a Brodix) and our temp was at around 210 - 220 F after a pass. We run water to try to even...
Hi Michael, mine only had one wire and we had it wired to the positive on the coil/transformer so that when it reached the designated rpm it's a...
