Separate names with a comma.
Those of you running a crank support - do you happen top know exactly what kind of bearing is used? Here's what I've got: I run a 2.3 Ford turbo...
For the big power combos do your rods have a solid beam or the milled out center portion? I've seen pictures of fuel rods that were solid beam and...
Theoretically millijoules should be a good number to use as comparison but I get the impression it's not that simple. Not trying to be too cynical...
I'm glad to see some people trying the Electromotive. I run one on my 4 cyl turbo alky deal and can't put a hole out yet at 12:1 and 42 psi. I...
Yes it's an alcohol system with a barrel valve for the primaries, a second barrel valve that opens at half throttle to feed the secondaries, and...
I'm just not used to running such high pressure and it made me nervous more than anything. I called Kinsler today and they said that pump will...
We saw the 300 at about 8000 - and about 200 at 6000rpm and the same boost and follows the rpm from there. I am unconcerned about idle and low...
It's a Kinsler pump, for the life of me I can't remember the model right now, but it was supposed to be a little larger than the -1 Enderle 80A I...
Hey guys - I'm in need of some expert opinions on how much a nozzle change will affect overall volume of flow....first off, there's not much about...
I'm wondering if that's the problem with using a wideband on a blown alcohol as opposed to a turbo motor. I would think raw fuel coming out the...
I'd love to hear if you can find some solid info on this, I've been looking for a while now and haven't had much success. This is what I have...
