Separate names with a comma.
The od is dependent on crank rpm. If they're spinning 10k at 40% that's 14k blower speed. At 8100 70% od would be spinning the blower 13770 rpm....
I was told by psi that they've spun them to 40k for 30 minutes at a time.
I didn't see that one . Thank you !!
Thanks Jody!! I've looked at those they are too big and bulky for our program. I was hoping someone like a chassis shop was building some light...
What are you all using ? I need something that is around 10ft tall and 8 ft wide. It needs to handle 1000-1200 lbs. I've looked all over the...
The one that's 1/2" ahead is a retro. The others are a delta
Buy a boat use it as an anchor.
That's odd Try installing diodes. You can get them in whatever amp rating you need. You could install a stand alone brake system controller. I...
I think they sell 3 different v-notch spools. There's even a blank that you can make your own v-notch. The leak down is just a starting point...
I forget. I would call them to be sure.
I was referring to the injectors spraying up or down. I tried it on a roots and a D screw.
I tried it both ways. I didn't see a definitive difference either way.
I don't know but you get what you pay for. I've learned that lesson a time or 3. Brad would be one of my first picks.
There's more than 20 times the surface area on the system one. Just be sure to run the correct micron mesh for the oil you run. I like the filter...
