Separate names with a comma.
arias, fontana heads this engine changed to a 10 bolt configuration in the early 80's (similar to a 392) the bore spacing is...
high overdrive we used to have a low compression engine. (9.9 cr) due to time & money limits we started at 57 over. also we...
geo blimey wayne, 2" is just enough. i have sometimes run 1.950 but depends on springs. take a spring & retainer and put...
valves wayne, you are right that the geo is better w/ shorter valve. you may not have enough room for a good spring with...
sleeves you are only going .017 more per side, should be fine. the brad "pro mod" sleeve is 4.666 under the flange and 4.610...
testing dave, went testing last saturday at dinwiddie (vmp) with my top dragster guys. they will run mostly with d.c. outlaws...
rotor speed dave, that is a bunch of rotor rpm. 9800 x 1.52 is 14900 at the supercharger. oh well, i know that you go...
clearance hey 400, where are you measuring the piston diameter??? you should check it just below the oil ring and 90* from...
i really know little about this team except they sure put on a great race this weekend!! most consistant and impressive!!...
glide & brute sir, if you don't have to run a powerglide, DON'T..... they keep making better parts for them but all are...
