Separate names with a comma.
Are you sure the rings are being put on the pistons correctly? I hate to admit it but we chased a similar situation a few years back only to...
Have a good used 4.500 Callie's. Amr49028@msn.com or 517-795-8065
Contact Darren Kirkpatrick at Maine Fabricators. If he can't do it he will know who can.
Does anyone make a new shaft with the Dunn cross to go in my cast base or do I need a complete new billet drive? This is for a 10.2 tall Chevy....
Switching from Mallory sm+ to msd 44. Can I use the adapter that goes over the pins in my Mallory drive to a Dunn cross? Or is the load to much...
Ok, no real sign of detonation but there is one cylinder that shows significantly more heat both egt and plugs than the rest. Making a intake...
Was told by a tuner that to much advance can cause excessive blow by due to causing piston Rock in the bore and ring flutter. I'm not looking to...
If you think you may be having ignition issues call Spud at FIE. he will get you set straight. a 44 mag is overkill unless you are running nitro.
If you get the tune up right it wont detonate and push the gasket out. don't go past the 80 that arp recommended or you will stretch the stud and...
Allen, Just call ARP direct. We order direct from them all the time. If they do not stock them thay will make them for you. Jason Webb
After we have ours done I will let you know if it works if you are interested in having it done.
Ours cracked from the oil hole to the front. I am going to fix ours this winter and probably use it next season.
