WTB Lenco 3 speed +Rev.

Discussion in 'Noonan Classifieds' started by Bob Meyer, Jul 19, 2022.

  1. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    764
    Likes Received:
    36
    Fine spline only, 1.25- 1.25 preferred, w/QR rear cover for F/C application 35 spline output. Will also outright buy 1.25 gearset.
    Contact Bob 619-440-7701 or meyerracecars@sbcglobal.net
    Thanks Wil
     
    #1
    Bob Meyer, Jul 19, 2022
  2. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    764
    Likes Received:
    36
    Sorry; CS-1 Trans and gearsets only !
     
    #2
    Bob Meyer, Jul 23, 2022
  3. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    764
    Likes Received:
    36
    Thanks Wil, never got it on FB page, but I've found what I need here on the old fashioned forum ! :)
     
    #3
    Bob Meyer, Aug 31, 2022
  4. Paul Noakes

    Paul Noakes Member

    Joined:
    Nov 28, 2006
    Messages:
    128
    Likes Received:
    0
    I have a bunch of CS1 parts and pieces. I have a 28% gear with a drum and clutch pack ready to drop in, it also comes with the rear shaft. I also have a 31% which has some damage. It will need planetary gears. I also have 2 complete new sprags -inners and outers. 18 clutch discs and 19 floaters new. As well as a box full of bites and pieces.
     
    #4
    Paul Noakes, Sep 26, 2022
  5. Graham Brown

    Graham Brown Member

    Joined:
    Mar 4, 2019
    Messages:
    46
    Likes Received:
    11
    #5
    Graham Brown, Sep 26, 2022
  6. bossman

    bossman Member

    Joined:
    Jul 10, 2009
    Messages:
    66
    Likes Received:
    0
    Looking for 1.25 to 1.138 fine spline gear set.
     
    #6
    bossman, Oct 11, 2022
  7. bossman

    bossman Member

    Joined:
    Jul 10, 2009
    Messages:
    66
    Likes Received:
    0
     
    #7
    bossman, Oct 12, 2022
  8. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    764
    Likes Received:
    36
    Well, I now have have overdone it, the leftover is a complete CS-1
    3- speed with reverse, 1.34 / 1.31 ratios, with 4 run old "strips & clips" sprags, air shift towers, 1-3/8" x 10 spline input shaft for 8-1/8" can, out of cert. Taylor blanket. $ 3750.00 + frt. Call or text me 619-440-7701 , or it's still at APT , it can be had with different ratios or "helicoptor" sprags + $.
    Call Rob 619-296-9180 mention Uncle Bob's CS-1 trans.
     
    #8
    Bob Meyer, Oct 29, 2022

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM