TWO-540's Fresh, CN & Gen6 Block, Dart Heads Blown, Manifold to Pan

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Mar 5, 2019.

  1. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    367
    Likes Received:
    7
    540 cu. in. CN solid block Blown Alcohol motor four runs old from a complete freshen at Steve Schmidt racing engines. Has had professional window repair and fresh line bore before assembly. Fresh 18 degree Big Chief heads fresh with new TD shaft rockers, Morosso billet valve covers and new Trend push rods. Fowler rods, Arias 12 to 1 pistons, Bryant 4.25 billet crank-new. Clark head gaskets. Belt driven billet external oil pump, Dan Olson oil pan. MSD black 44, bronze gear, magneto with box, big cap and wires. RCD crank trigger, RCD degree wheel. 8mm GT 59 bottom pully, 8mm. GT 30 top pully, 2-8mm. belts like new. Front aluminum cover with upright mag base, idler and idler pully, billet fuel pump extension. Indy blower manifold and spacers. Enderle 1100 pump with shut off an bypass. Enderle K-Valve, JBR four blade hat, lines and hardware. 18-71 Littlefield blower, made 56 lbs boost with the above combination, super high torque starter and flexplate. Ran 4.11 in the 1/8 at 179 mph, in a 2800lb. heavy car - automatic transmission. No expense spared and well maintained. Can be purchased complete, ready to install and run $26,000. Long block, manifold to pan less the blower, hat, fuel system, mag etc $20,000. Plus Shipping or COD Brownsburg, In.


    COMPLETE new/ just assembled, 540 cubic inch Chevrolet blown alcohol engine, fresh line bore, fresh cylinder bore/hone Gen 6 Block, Dart Pro Series aluminum 360 heads, manifold to pan. 10.2 deck ARP head studs, O-Ringed with solid copper head gaskets. New Howard cam, new rod and main bearings, fresh balance, Scat 4340 crankshaft, new Scat H beam rods ( aluminum rods add $800), JE NEW 11.0-1 alcohol pistons. Dart 360 Pro Series aluminum cylinder heads, NEW springs, locks and retainers, new intake valves, fresh valve job on intake and stainless exhaust. Howard roller camshaft with roller lifters, Smith Bros push rods. Roller rockers, valve train girdle/support. Wet sump deep 10 quart oil pan, wet sump high volume oil pump. BDS blower manifold and burst panel. $14,000. With BDS polished 8-71 supercharger, Big and Ugly black injector hat, Enderle K- valve, Enderle 110 pump, shut off and lines, distribution block, idler, idler bracket, belt and pulleys, Mallory mag, coil and wires. Chrome zoomie headers. A lot more, ready to ship $18,000 Plus Shipping.

    Contact: phoenixmtrspts@gmail.com/Composite Specialties
     
    #1
    Last edited: Jun 11, 2021
  2. Josh beiser

    Josh beiser New Member

    Joined:
    Apr 25, 2019
    Messages:
    8
    Likes Received:
    0
    Hi there, if possible please send some pictures of the max idler assemblely and other front stuff for the BBC thanks for your time. Jbbeiser7@gmail.com
     
    #2
  3. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    367
    Likes Received:
    7
    Bumpty Bump
     
    #3
  4. bruce mullins

    bruce mullins Top Dragster

    Joined:
    Aug 2, 2003
    Messages:
    997
    Likes Received:
    3
    do you have a phone number i can call you at?
     
    #4

Share This Page