Trick Titanium Cans - Spec Rite converters - Lenco CS1 Gear Sets

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Jan 2, 2021.

  1. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    348
    Likes Received:
    6
    Have two Trick Titanium aluminum cans, one brand new lock up and one non lock up 6 passes old. The cans are dual pattern, no starter pockets. Hemi/Chevrolet bolt pattern,

    New one, SFI 6.3 #A017342 - Serial # 0207-AL, 6 3/8 in. deep, needs current cert, used for mock up only, lock up $1600 OBO.

    The used one, non lock up, SFI 6.3 #A014405 - Serial # 0055AL,Hemi/Chevrolet bolt pattern, back from having new liner installation due to weight coming off converter and peppering inside of can, new chromoly liners, 6 3/8 in deep, excellent condition, needs new current cert. $1200 OBO. plus freight

    Bruno-Quick drive Spec Rite blower converters -( two) , one used, 4400 stall, six passes old ran 5.70"s $800,
    The other Spec Rite Bruno blower converter is brand New, 4600 stall, still in the box, $1000 plus freight.

    Carbon fiber drive shafts PST ( two), one brand new 33.5" center to center with 1480 yoke $800,

    The second drive shaft PST, 6 passes old, 32 " center to center with 1480 yoke $600.

    Third one, identical chromoly 32 center to center" $400. plus freight

    Lenco CS1 gear sets, fresh new clutches and steels, back from Rob Moore at APT. 1.68 ratio, One 1.48. $500 ea, plus freight

    Lenco CS1 1.44 gear set fresh with new clutches and steels, back from Rob Moore at APT. $600 plus freight

    Contact Dana Wardell - phoenixmtrspts@gmail.com
     
    #1
    Last edited: Jun 25, 2024
  2. david texido

    david texido New Member

    Joined:
    May 9, 2016
    Messages:
    10
    Likes Received:
    0
    I sent you an email for the carbon driveshaft.
     
    #2
  3. David Weston

    David Weston New Member

    Joined:
    Sep 9, 2022
    Messages:
    1
    Likes Received:
    0
    Are the CS2 gear sets still available?
     
    #3
  4. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    348
    Likes Received:
    6
    Bumpty Bump
     
    #4
  5. Benh1978

    Benh1978 New Member

    Joined:
    Tuesday
    Messages:
    2
    Likes Received:
    0
    Interested in the cs1 1.68 gear set if its still available.
     
    #5
  6. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    348
    Likes Received:
    6
    Yes, I still have the gear set. If you want it, send me your address and I can calculate the freight. Thanks Dana !
     
    #6
  7. Benh1978

    Benh1978 New Member

    Joined:
    Tuesday
    Messages:
    2
    Likes Received:
    0
    Are they coarse or fine spline as i am needing coarse spline? My address is 2861 co rd 21n Fayette Alabama 35555.
     
    #7

Share This Page