TFX oil pans , blocks, 4.500 billet cranks ,

Discussion in 'Noonan Classifieds' started by Brendan, Mar 11, 2020.

  1. Brendan

    Brendan Authorized Merchant

    Joined:
    Feb 22, 2010
    Messages:
    264
    Likes Received:
    1
    11 mm belts 25.00 for 3

    piston racks with covers - 150.00 3 funny car master cylinders 100 for all ~

    392 hemi cranks 500.00 ea


    3.750 crank Bryant 1350.00

    RCD 5" extension 275.00

    nice sleeve driver -55.00 .....for aluminum motors 4.187 4.250 4.375.4.440 bores
    TFX dragster wet sump oil pans -

    Simpson 6 pt dragster belts -125.00 still in cert .

    392 HEMI Cragar blower manifold 575.00

    392 HEMI mallory mag base - new 185.00

    lots of morse cables - Call and I will measure -give me your lengths ~
    Moore couplers 40.00 ea 6 in stock


    -20 SIMPSON 2 peice firesuit black - 6' 200#-975.00

    silver or black chute packs - 50.00 some new ~

    RCD blower belt guard starter bracket 3 bolt mount 100.00


    KB complete short block never been hurt 4.375 x 4.375 =526 was in funny car ,
    set up for fat heads, std deck. with spares
    8500.00


    2 winberg 4.500 stroke splined crankshafts 8 runs on them fresh mag and polish - 650.00 ea - show surface cracks



    RCD 9" long snout shaft 35.00

    3" trailer ball for goose neck 35.00

    Aluminum funny car funnel -set up for vented tank 1-3/4 opening with filter 225.00

    Waterman 1.250 inlet fitting-25


    sb chevy idler bracket with pulley and tee nut - 295.00

    RCD oil pump adapter with billet clamp 25.00 never used


    bug /bird stainless hat lines 25.00

    Jackson BDK valve 200.00


    9" pinion support with bearing - 75.00


    T&D shaft rockers for sb chevy 750.0


    10" East West titanium glide clutch with discs and floaters fresh cert 3300.00

    fresh blown 468 ci blown alcohol NEW GM 4 bolt big block chevrolet std deck , new studs , merlin heads all new valves ,springs retainers , roller camshaft ,lifters forged crankshaft , new pistons, rods ,Akerly&childs rings, bearings nice 7.0 motor -8000.00 -blower and injector available


    BB copper head gaskets 4.390 x .40 50.00 pr .

    392 cragar blower manifold drilled for port nozzles -629.00 undrilled 575.00


    Blower shop gas 6-71 blower 1975.00

    BICHIN piston rack covers street rod quality keep those soldiers clean and warm !- 59.00 ea

    426 engine short block covers 75.00

    TFX copper head gaskets new in package .100 and .80 .70 50.00 pr . 4.250 bore


    big block chevy dragster zoomies 425.00


    8" blower snout 350.00 Littlefield

    50-100 hydrometer 190

    16 port dist block 30.00

    spark plug tee wrench 30.00


    NEW Blower shop 6-71 alcohol blower ! 2650.00

    4:71 9" rear end gear with coupler for dragster 75.00

    Dragster oil/ fuel tank -5 gallons black anodized 250.00

    AJ 426 exhaust gaskets 25.00 pr.

    big Moore couplers 50.00 ea x 5

    13" MOORE drive shaft - 125.00

    RCD 11mm belts 1595 2 for 25.00 ea . x 20 available


    426 hemi head studs ;


    10.250 11' long x16 120.00

    1/2 x11.00 x16 125.00

    9/16-1/2 step 12.250 long x13-150.00

    .

    TRICK TI clutch can for dragster - 392 hemi 2900.00 -as new

    B&J 2 speed w/ shifter and reverser 2400.00

    Brad anderson oil pan gaskets 35.00 ea

    TFX oil pan gaskets 38.00 ea

    44 amp coil -75.00

    Blower injector spacer 2 inches tall -2 inches forward 10" opening lines up injector on blower opening - 295.00

    Polished Donovan 392 Hemi valve covers with short breathers - 1550.00

    417 DONOVAN VALVE COVERS nos polished 1350.00

    Simpson fire mask in red blue orange or silver 335.00
    Goggles -98.00



    Brendan (408)266-3324 bmurry@racecarparts.com
    www.racecarparts.com
    ups every day , Visa /MasterCard
















    [IMG]

    [IMG]

    [IMG]

    [IMG]
     
    #1
    Last edited: Aug 27, 2020
  2. fully blown alcoholic

    Joined:
    Apr 13, 2020
    Messages:
    5
    Likes Received:
    0
    what is the deck ht for donovan drive
     
    #2
  3. ybmotorsports

    ybmotorsports Member

    Joined:
    Oct 24, 2009
    Messages:
    50
    Likes Received:
    0
    Do u still have 4.500 hemi keyed crank?
     
    #3
  4. Brendan

    Brendan Authorized Merchant

    Joined:
    Feb 22, 2010
    Messages:
    264
    Likes Received:
    1
    No keyed crank left I have 2 splined cranks with gears -show surface cracks - 500.00 ea (408)266-3324
     
    #4
  5. GottaGoFaster

    GottaGoFaster Member

    Joined:
    Nov 17, 2016
    Messages:
    72
    Likes Received:
    5
    Hi Brendan--Still have the KB short block? What KB block? Can you tell me about the run count, crank details, cam bore, spares available, etc.
     
    #5
  6. Brendan

    Brendan Authorized Merchant

    Joined:
    Feb 22, 2010
    Messages:
    264
    Likes Received:
    1
    best to call (408)266-3324 this was a spare motor tucked under a bench in the shop - ran 5.79, cast block no windows,was fresh ready for heads and accesories -
     
    #6

Share This Page