FWD/NUT/REV lever for 3spd CS1

Discussion in 'PSI Superchargers Tech Questions' started by NZpromod1968, Nov 9, 2014.

  1. NZpromod1968

    NZpromod1968 New Member

    Joined:
    May 19, 2013
    Messages:
    22
    Likes Received:
    0
    hi Im after some help im running a 3spd CS1 with Bruno,
    I run air pods but need to run a lever for FWD/N/Rev but needs a inhibuter switch so it wont start in gear.
    we made a lever but didnt work so just looking to see what other with this set up run that works

    cheers Nigel
     
    #1
    NZpromod1968, Nov 9, 2014
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Hi Nigel. We have a forward/reverse lever from Lenco and we use their safety neutral switch. It s a very strong switch with a threaded barrel and a ball plunger to activate the switch. There shifter is very strong. I don't have a picture of it but if you send an email to Matt at Lenco I am sure he can send you a picture of it. Mattmoore@lencoracing.com.
     
    #2
    Last edited: Nov 9, 2014
    Mike Canter, Nov 9, 2014
  3. NZpromod1968

    NZpromod1968 New Member

    Joined:
    May 19, 2013
    Messages:
    22
    Likes Received:
    0
    thanks Mike
    that was a great help have sent him an email
     
    #3
    NZpromod1968, Nov 9, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM