8.3 Arias Solid Billet Heads, 10 ltr 3 Pushrod Block

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Jan 2, 2019.

  1. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    Have two pair of 8.3 ltr. billet 10.7 deck aluminum, dual/single plug, solid heads with titanium 2:40 intake valves, stainless 1:95 exhaust valves, springs, retainers and locks, $3200. Two pair that are bare $2200 , I have the valves, springs and retainers separately $1000.

    Have single bare head that needs one chamber cleaned up, good for a spare head $1250

    Have a New Century aluminum block back from the machine shop, had three new sleeves installed, bore checked and honed that will work with the above combination. $2000 plus freight. Sold.

    Arias 10 ltr. aluminum water block, 3 push rod ( rare ) with sleeves, front magnesium cover, front idler brace, main caps. $1500 plus freight

    Have lots of MBR and 8.3 ltr. Arias parts available sold separately . I've probably got what you need with out the supply chain wait.

    All prices are without freight. Contact Dana Wardell at phoenixmtrspts@gmail.com
     
    #1
    Last edited: Sep 22, 2022
  2. Donreed

    Donreed Member

    Joined:
    Nov 17, 2015
    Messages:
    107
    Likes Received:
    0
    looking for aries heads that fit a rodeck block (chevy)
     
    #2
  3. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    #3
  4. Stubs

    Stubs New Member

    Joined:
    Jul 12, 2017
    Messages:
    11
    Likes Received:
    0
    Dana, PM sent.
     
    #4
  5. vintager racer

    vintager racer New Member

    Joined:
    Jan 21, 2020
    Messages:
    2
    Likes Received:
    0
     
    #5
  6. vintager racer

    vintager racer New Member

    Joined:
    Jan 21, 2020
    Messages:
    2
    Likes Received:
    0
    hello can you email me pictures .please thanks.and are thes full water?
     
    #6
  7. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    Send me your e-mail address for pictures, send to phoenixmtrspts@gmail.com
     
    #7
  8. Ron Sapp

    Ron Sapp New Member

    Joined:
    Jan 30, 2020
    Messages:
    17
    Likes Received:
    0
    Dana, what is the length of the pushrods you have listed? Thanks!
     
    #8
  9. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    Will check today when in the shop, let you know. Dana
     
    #9
  10. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    10.5 inches and 9.0 inches for 11.2 deck block
     
    #10
  11. Ron Sapp

    Ron Sapp New Member

    Joined:
    Jan 30, 2020
    Messages:
    17
    Likes Received:
    0
    Thanks Dana, I will measure what I need & get back to you.
     
    #11
  12. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    Did you ever find your Arias hemi head to Chevrolet/Rodeck block combination? Just got a set in complete with rockers, manifold,etc.
     
    #12
  13. Thomas Lawlor

    Thomas Lawlor New Member

    Joined:
    Oct 5, 2021
    Messages:
    1
    Likes Received:
    0
    Just saw your above post with the BBC pattern Arias hemi heads. Been looking for a little while now. Please reply.

    Thank you!
     
    #13
  14. Stubs

    Stubs New Member

    Joined:
    Jul 12, 2017
    Messages:
    11
    Likes Received:
    0
    Dana, I sent a PM
     
    #14
  15. Stubs

    Stubs New Member

    Joined:
    Jul 12, 2017
    Messages:
    11
    Likes Received:
    0
    Dana what size are the mains and the camshaft on the 10 liter block?

    Thanks
    Stubs
     
    #15
  16. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    I believe the block has 3' mains when I get by the shop I'll have to measure. The cam is a 55mm cam journal
     
    #16
  17. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    Bumpty Bump
     
    #17
  18. Andrew Sobieski

    Andrew Sobieski New Member

    Joined:
    Sep 26, 2022
    Messages:
    1
    Likes Received:
    0
    Have 2 -10 liters with 5 inch cranks (640) if interested , number 54 block and 108 block with 8 runs naturally aspirated
     
    #18
  19. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    351
    Likes Received:
    4
    Send some pictures of the blocks to phoenixmtrspts@gmail.com
     
    #19

Share This Page