Separate names with a comma.
We use Royal Purple Nitro 50 in our twin turbocharged, methanol fueled engine. We have had tremendous success with it; the bearings looked like...
K&K Advanced Door Car Concepts. Talk to Gary, he used to work at VP.
You know, I was looking through an old magazine a couple days ago, it had a nice article on Darrell, written right after his death. It mentioned...
The crank trigger wheel isn't on backwards, is it?
I've got to say a big thank you to Jeff and Mike at B&J transmission for all the help they have given me in sorting out some transmission...
M/T and Hoosier both have the 33/10.5x16 slick, and let me tell you, those are some great tires!
I need a set of clutch fingers for a Hayes billet hat clutch. The fingers have the short tips. The clevis pin hole in these is worn beyond belief!...
Something else to check: After you do what Lorenzo said to do, be sure that you have 250 psi pressure on top of the shift servo the entire time...
Dave - What kind of power are these clutches safe to in a dual disc configuration? I've got one of the 12 stand versions with the 3/8" studs,...
Will - A properly designed air to liquid intercooler can easily knock 180-200 degrees out of the air temp. Keys are core design and water...
Jason Scruggs had liners on at the Huntsville ADRL race, and went 3.85 @ 196 with them. Went a string of .80s and .90s and won the race, too. They...
I agree with Bob on this one. When an ignition box has issues, it will pick on either two or three cylinders, and it will always be the same...
Crashly - you have mail. Mike - no problem, glad to finally have an idea of how much fuel those blower motors actually use!! I knew it was a...
I didn't do any math. Those numbers are from the dyno. I fully agree, there isn't a roots or screw blower motor making 2800+ with 9 gallons....
Brake specific for turbo methanol is 2?!?! Holy smokes! That may be right for a blower motor, but a little fuel heavy for a turbo motor. I have...
Something else that will happen if you get a Bruno hot is that the machined surface underneath the pump will warp. This will cause large...
How much rpm drop do you usually see on the gear change? Does the converter "flash" on the launch like converters do in other applications, or...
To convert from 25" to 28", muliply by the square root of 28 divided by 25, which equals 1.058. so an airflow measurement of 100 cfm at 25" would...
Keith - We have run the B&J transmission in a door car for a few years now, and we love it. Mike at B&J is the most helpful person in the trans...
Actually, a friend and I contemplated running a twin turbo in an outlaw-style funny car, but could find no real place to race, so we went with the...