Separate names with a comma.
Find a Uyehara (URC) you will be very glad you did.
Yes, It will Help. I have tuned hundreds maybe thousands of cars on my chassis dyno. I cannot type fast enough to tell you everything you should...
As Denny Savage would say,(One minor miscalculation and next thing you know you're on fire,upside down and laying over in the hot dog stand.)...
If you are ready to spend $500,000,+. You may make the top ten, if you make the right choices in car and crew :D. If you can afford to loose that...
Can I see a picture of the broken injector. I can probably repair it.
It is on NOW! http://espn.go.com/espn3/index/_/sport/auto%20racing#
Live from Pomona, all classes and no commercials. Kragen O'Reilly Auto Parts NHRA Winternationals The 2011 NHRA season gets underway with the...
I have used Brooks, GRP, Venolia. They all worked well up untill 10,700 RPM's under load 26 degree timing and egt's 1100-1150 temps. At 10'700...
Mineral spirits works for me, as long as the resin is not hard yet.
I had some made by a hose company. They looked right and I thought they fit right too. The fitting on the hose ends were not right match for the...
Live audio and video at espn3. http://espn.go.com/espn3/index/_/sport/auto%20racing
Even up? or did you have to throw some cash in on the deal to get him to take the wife? ;)
Silicone on the side seals and over the top around the out side of bolt hole to the crank seal and a thin film on each end of the crank seal....
In my TAD dragster, I regularly ran with 6 turns in on each of the base pressure spring adjusters. You have 6 fingers with a hole in each to...
Base- Set these all the same number of turns in from contact with the plate. 6 turns in is a bunch. 1 turn is a pretty big change. You probably...
I have been making some custom carbon fiber parts. I can repair broken and damaged Carbon fiber parts also. Here is a link where you can see my...
I raced Mike one time in Bristol, div.2, 03 race. My Crew cheif warned me saying Mike can be a tricky sometimes and no telling what he going to do...
Mike Cooper told me: Spread the bearing a little wider, so it's a tighter fit. Put some lube on the back side of the bearing and place in cap(...
Nope not Rocket science. Rocket science is EASY compared to running in this class. :cool:
By watching Bill Reichert, 5.103 @ 284.75 ? :D