Separate names with a comma.
Never got the chance to increase the overdrive at the weekend, as the car went from fairly predictable at the previous race, to having a miniscule...
Blower has 4 full passes on it (and one aborted after the launch). It is tighter than my screw blower, but not as tight as I would have expected...
Mike - butterflies are pretty much all the way open (see pic1) except when this happens [ATTACH] [ATTACH] . Manifold face is flat, and there's no...
Asking for a friend.... Recently upgraded an old Mooneyham 10-71 to a new TBS Hi-Helix 10-71 on a 509ci BBC in a FED. Old blower peaked out at...
Thanks, Sammy. I'll check mine but I'm pretty certain that they're in good shape. They get examined after each run (as we have an issue with the...
Photos aren't there (get a 404 - URL not found). Wheels are off after every run - haven't seen any problems with mine, but I might have been lucky.
Thanks. I'll get back to you when I know what option I'm going to take.
I've run mine for 8 years with no problems …. 0.9 60's and a 5.79 best.
One wheel required (due to an incident). PM me if you can help. Martyn
Have you reversed the pump front cover? We had an Enderle pump flowed, and the flow bench ran in the opposite direction. When we got it back, no...
Jonny - We use a Burco 30L water boiler to get the methanol out of our oil. They're thermostatically controlled but only go up to 98C, so might...
Hi Phil We run 4.375 bore, too, and have a used set in the race truck which you could borrow (as we keep the old ones in case of a disaster) -...
We were running one until it came about as close to breaking into two pieces as it is possible to get - we got very, very lucky, much less than...
Torco 60wt (not hot enough in the UK to need 70wt). We change bearings every year although they could go again. No point giving supplier and price...
According to the document on the Gorr web site - " This barrel valve is designed to use a #8 idle check at 65 psi, failing to do so may result in...
We don't run one anymore (sold ours to Kim Christiansen). From memory, it's around 58lbs. setting it to 10lbs, resulted in a burnt piston which...
Always a good idea to check that you're not running a Gorr dual circuit BV which needs the Idle Check set much higher...
Wayne - we run out rods maybe a little longer than Will - usually change them every 2 years and the number of runs will depend on how many rounds...
Use the smaller bottle and keep an eye on the pressure. Fill it when it drops off. Agree with all others have said - before moving the shifter :-...
We run a 4.375" TFX 92, and the Darton sleeves we use are TFX specific (though they don't specify TFX models, just TFX). We use the 100-1021-FH-SD...
