Separate names with a comma.
We just use the stock GM cranks 3.76 stroke, twist the motor up to 9600. Has run 5.96 @ 242, works good. Stephen McClain Tri-State Racing AA/FD
We run them in the aluminum until they get loose then put in the bushings.
We used the two 12 volts that were in the crew cab truck and a series / parallel swithch, ( like the big trucks use ) to swithch from 12v to 24v....
We used 24 volts on ours. Stephen McClain
Chevrolet on Nitro We have run our Iron block Dart @ 9600 rpm, that was on a 6.12 @ 242 at this years Bowling Green NHRR. We only run 14% blower...
Bolt pattern is 5 on 5, back spacing is between 3.5" and 4 " Stephen McClain Tri-State Racing AA/FD 410-392-6619
We use the Fel-Pro PermaDryplus, they have lasted for years. NO leaks Tri-State Racing AA/FD
Bowling Green Bowling Green is a Heritage Series race but has no points. That race is a good one and does have Top/Fuel.
We did our alcohol car the same way and it did work just like you said. One thing you need to be sure of is that the mag is off when you do that...
Who is your cousin ? I know the guys from Garrettsville. Who is your cousin, Jim, Woody, Tim ? What part of the country are you from ? Thanks...
Hey Mike Hey Mike, Do you have any races out there ? Stephen McClain
More than one way ? We run a FED that is about 1970 pounds and M&H 12 x 16 Tires. with tubes and liners we run 10 lbs in the tires and 40 lbs in...
Hey James, Did you ever talk to Jimi Young ? Stephen
Blown nitro small block Jimi Young has run 5.95 with his small block and a lot of low 6's in the 1/4 blown nitro. You can find him on facebook...
pioneer mag drive We have a new in the box pioneer mag drive that we are not going to use, $300. and its yours. let me know. Thanks Stephen...
Michael, We like the 840's the best because you can get a better spark plug for them, but we also use the 291's. I don't know what those other...
Hi, I raced with Jim Bucher in 1976. The combination that we run is the same as he did. We are using the iron block, closed chamber iron heads...
Hi, Is your Chevy block short or tall ? If you decide to switch to a aftermarket block we may be interested in your chevy if it a short deck. We...