Separate names with a comma.
There are two ways to tune a motor on nitro: 1. Tune it like methanol where you are looking for plug color and you tune with an AFR in mind....
I've heard that "Chevron Synthetic All-weather THF" is even better than the John Deere fluid, is orange so you can see it and costs less. A 5...
The Hilborn -4 has the same size gear as an Enderle 1100. They usually make a little more than 17 GPM @ 4000 pump RPM @ 100 PSI. They aren't...
Methanol specific gravity: .801 @ 50F .796 @ 60F .792 @ 68F .791 @ 70F .786 @ 80F Here's a methanol/nitro chart you might find useful:...
RBS Superchargers sent one of the -8 in-line screen filters to test a while back. I was testing a system with a 990 pump at the time and put...
If the belt and pulleys have rounded teeth, it's a Dunn. If they have regular trapezoidal teeth, it's an Enderle. I've rebuilt a few of each and...
The calculator on the FIE site that Eli refers to is based on actual data collected here over the last 6 years. I go back and figure the Cv for...
Since it starts out full and ends up full, it doesn't change the level in the tranny. The connectors close up when you unplug them, so the unit...
Yup, it works. I've been doing that for a while with a unit I built years ago. Photo:...
My prices are the same as if you ordered direct from ETC. If you ask Hank for the "FIE Upgrade", you'll get charged an extra $13 for the...
Ok Mike, I give up. I've given several clear examples of how things completely unrelated to air cause the fuel requirements of the motor to...
Uh oh, it looks like we're not in agreement after all :) That's 3.2 - 5.0 for supercharged stuff. And that's just in my experience so far....
...and I can't disagree with a word you typed. However...practically speaking, we have to do the math to calculate a tuneup at some point...
Certainly, the more air in the cylinder the more fuel you need to go with it. There's no doubt about that. But that isn't the only determining...
My experience (and success) flowing and tuning an extremely diverse group of different combinations has shown me that different setups can require...
The appropriate AFR with methanol completely depends on cylinder pressure. So, the amount of boost you're making, compression ratio, load on the...
Dave, Specifically, what "stuff" exactly are you asking about here? I don't have any software for sale. Thanks for the kind words Craig,...
Hi Guys, Glad you like them. I was being continually asked for something to do the job. They are wire-EDMed for me by a local machine shop...
The more cylinder pressure present (boost and/or compression), the more voltage it takes to jump the gap in there. The Mallory and MSD mags can't...
Hi again Marty, Nope, I sure wouldn't do that...a PSI kills everything, it isn't selective or intelligent at all. It would oscillate - meaning...