Separate names with a comma.
My old kb pump did the same think,took it out and spun it with a drill,no problems,spins easy.Put it back on and tested with a drill,tight as...
Just a question/poll type question here. A well known motor builder here said when turning the motor over in order to get oil pressure on the...
I use the cnc double piston with a single fluid tank, but if I were to do it again,I would use a duel tank type so if there was a leak or blown...
Thanks Guys.............
Testing all year and learning the car, we now are getting downtrack and doing it on a regular bassis. I have changed the main a few times per...
I looked at gilbertsons car closley and noticed that it was a slip joint Murf car.Uprites and diagonals from the drivers compartment foward were...
Same as jap steel,solid mount. Was testing on wednsday,tire was hitting body much more than before. I am going to try a m-t with a 109 roll out...
tire rub I thought I could get away with 2-3/4. Tire rubs even at burnout. 3-1/2 sounds about rite to me. Good luck......................John
Thank you guys for all the info. I an going to try a billit base and 1 piece shaft from wizzards and try again.I will use all advice and sort thru...
Noticed the mag on the 4th pass this weekend,moving around pretty good,checked and found the shaft in the housing bent for reasons unknown.Also...
Just taking a moment to say thank you to all of the people who have replyed to my questions on trans,chute and other issues we were having....
Have co2 chutes comming,Do most racers use a seperate co2 bottle or use the the same bottle the shifter taps into. Just wouldnt want to mix both...
Thank you for all the good info guys,I use 2 chutes angled and mounted upward,,at first I thought to much but not now. We had Jay Howell of the...
How much co2 does it take,or better yet,how many launches on a 5 lb co2 bottle befor its empty. Also aprox how long is the cylinder beond the back...
Had a bad deal at bowling green this weekend,chutes became tangled in wheelbars,gotta do something here. The bars are 8 feet long,look great...
I re-installed the trans last nite,it did not leak on the bench. I installed a new front seal and installed it with sealer on the outside housing...
Sorry for the late post,bussness forced me to hold off untill yesterday. I pulled the trans and filled it on the bench. It did not leak with the...
Eli, I am on it today,good idea. I just know it will be one of those SIMPLE things,commonly overlooked.......................
Hey Mike, I also thought the air was a VERY good reason,but the trans is leaking without any air going to the pods. I can put in the recomended...
I had gotten the seals from lenco and they were the same seal I can get at the local berring supply,however they are half price locally. All info...