Separate names with a comma.
Thanks Mike, but neither number is in service.
Thanks Kosky I sent you a message
Double post.. Delete please
I´m looking for any kind of contact info for any of the members of the Hemi Hunter Racing Team. https://www.draglist.com/stories/SOD%20 ......
Some time ago I was quoted a 50hp loss for aluminum block in an 800hp NA SmallBlock application. Have not verified it myself.
I would not squeeze a roots, without adding fuel to the hat.
Give the bugcatcher a tiny bit more gap on the blades, and adjust the idle rpm if needed with the barrel valve.
The cam and lifters are actually the least of my worries after every pass, when the covers come off. They probably would be if they where flat...
There are tens of reasons it does or doesn't. One of them is how the contact patch of the tire lines up with the kingpin. If the contact patch of...
I think there is so much violence below the blower that there is no chance for any waves or resonance, helping or hindering the intake charge...
It's often funny, how the best of passes are made without the full set of cylinders firing. You very likely can see whether it was firing by the...
Check out the sand boys.. https://www.powerproracingproducts.com/clutch-discs-floaters-facings.aspx
Lets wake this thread up, any updates OP? How is the main thrust? Can the clutch chatter when not engaging fully, violently shaking the crank...
Its always a combination of parts. The influence of idler diameter and mass is minuscule to performance, but it can make the difference between...
Is there ever a reason to raise the blower from the manifold with a spacer..?
Sorry for your loss. He was very innovative and productive.
If you have options, I'd always go with the bigger blower. The response is the same, the boost can be the same, but with less blower rpm and less...
All the stress comes from the tuning. Blower speed is tuning. The main difference from the blower change alone, is the boost will progress...
No sir, that's with a distributor drive pump, dry sump.
We run the Peterson filter boss with priming pump. one extra hose to supply the pump with oil and you can prime all you want. 80psi with the drill...
