Separate names with a comma.
camSHAFT if you want the shaft call oddys . crane, comp cams,engle,Fowler engines has been a big help also.
Booooost bought a K-ll 6-71 from Mert, on a 477 chev makes 36lbs at 53% over 8300 engine rpm. went 6.49 219.45 in a 2025 lb front motor car
nitro mr V. not sure on the math part of it but a couple of friends of mine have a bit of experience with a small percentage. they built a...
Mr. Goodyear call a goodyear dealer they can give you the low down on compounds . most people on this sit are too good to answer our questions....
20 percent some friends of mine just had a 414 small block on the pump, ( naturaly asperated on alky ),they put 20 percent in the tank it made...
lessons someone told us they are stage 3 heads. how do you tell by looking at them ? we are planning on running them on our 85% motor. 413 inches...
thanks for looking at my post.we are putting together a nostalgia funny car with a late model in it of coarse, but being a chevy guy I know...
what is a bdk valve thanks for all the replies but i still dont know what a bdk valve is ?
thanks for taking the time to look at my post. i need some kind of a valve that will shut a small fuel line off at the 1 2 shift. i want this...
chute metal out of buiss needed to get our trans blanket recert also ( chute metal ) but they are out of biusness. bought a new one from Dennis...
540 short deck that rod ratio seems a bit steep. can you build a tall deck motor? how about a 10.2 or 10.7 block? Im no expert, we run a 477 chev...
no nozzel, big nozzel little backwards forwards upsidedown we tried every direction on our little 10 gallon motor never any different .if someone...
ratios thanks big D first Ill try and figure out what time 4 est is when its 2 here in land of lakes. thanks jim
Thanks to anyone who takes the time to look at this and offer any info or help. we are from the land of 10000 lakes and run a front motor car in...
we use a 6-71 (rules) hi-helix k-11 rotor on a bbc. just looking for some opinions on how fast some of you others might spin it. we are at 50 over...
compression we run a 4.5 bore 477 chevy 11.7/1 compression, 160lbs cranking pressure, 35 deg.timming, 36 lbs boost, msd 20. 9000rpms in the lights
the 20 box this box is tempramental, the first time we used one the car ran for a minute and quit. my ground wire was loose. after doing some...
leakage how do you leak what lines do you cap or plug ?
the tune up. we run a front motor car 477 chevy 11.7 comp. brodix heads 671 hh 34 lbs boost. 110 enderly pump.about the same area as you in...
Put A Bit Of Nitro In The Tank It Will Pick Right Up. Remember When Warren Johnson Used To Get The Drain Oil From The Nitro Teams To Run In His...