Separate names with a comma.
push rod meltdown I had a problem with #3 int. and found a pc of silicone in the rocker shaft that was pluging the oil hole to the adjuster. Just...
Hey Mark, Are you interested in teaming up for a couple of races this year? The only problem might be the shoulder hoop width. I don't remember...
need to buy new hose for my pro jacks. need to know id" and working pressure. my hose has no markings on the outside and I hate to cut them to...
KB vs BAE I have both a KB -500 Solid cast blk and a BAE -500 billet blk. the BAE is approx 20 lbs. lite . STAN
pulley size We rum a 54 tooth btm and a 24 tooth top 13.9 htd (2.25 over) and have used 2 belts in3 years. the pump extension has to be cut to...
throw out spring We run a spring on the arm outside the can. The length of the arm gives more leverage and can be increased easly. Dirty Rat
mag panel painting Dupont has a surface prep liquid that i have used for years. I would go to the web page and inquire about the process. I used...
Check the grounds we had thie same problem and found the wire connector was coroded and open. STAN
hope! When my trailer was broken into a couple of years ago I offered a large ($5,000) reward for the return of the parts. No questions asked. A...
rocker clearance Try using tall lash caps. We had this same problem and used the tall lash caps and they also will improve the geometry.:)
Ngk 6061-10 We had 3 plugs do this in atlanta. thought it might be the wires and changed still there. Anyone else have this problem? STAN
May god be with you Jared. My prayers are. STAN
I have tried everymethod know to man to keep the gasket from leaking. The gasket pushs out from the housing. Tried paper, rubber, RTV, yellow...
Mike" as a point of referance for myself and many others, what timing do you recommend for a large chamber engine? Is there a differance between a...
I dont think anyone wants to spend K$ on new parts or make huge chansges to tune up and the associated learning curves. We are a team who has race...
I just spoke to Bill Holt Div 2 director and he inforned me that unless you are a gold, silver, or bronze card holder that it will cost $140.00...
we use a dupont product that actualy pickles the steel. It's a two step process and leaves the tube a nice golden brown color. It leaves no...
I received a phone call last night from the Holts, and they informed me they have most of the "major" (psi blower, heads, intake, spare block)...
I would like to tell everyone that there is a $5,000.00 reward for information leading to the return of the parts no questions asked. thank you...
Fellow Racers, our trailer was broken into this past weekend at John Holt’s Race car shop, in Columbus Ohio. The assailants chiseled the hinges...