Separate names with a comma.
Call Jeff Burnett at Composite Specialties 317 852 1408
send it to Aerodynamic plating in Gardena Ca They know how to get it done properly, alcohol will eat holes in the bare aluminum its just makes...
I( have a set of 1 1/6 " Crane lifters with low runs, $1000 plus shipping,
Keith Clark &14 501 8519
it has dip switches to set RPM, uses a fiber optic signal from coil primary inductive pick up
Jeff Burnett at Composite Specialties
have a simpson , pants and jacket only might work for you, belonged to a racer who has passed, one of the few things left from the operation, call...
was just there, Steve is working will call back if you leave a message
call David at Lenco they have that uses a band clamp on the reverser
have a set of BAE mag covers, 8 plug with block off inserts with breathers, and all 16 tubes, call me if interested, I will be at HRR this...
bumb to top
splined crank is the answer, I use a hub with 6 3/16 keys, no lube or Loctite 300 lbs/ft of torque in the bolt, used the same hubs for 10 yrs....
bump to top
40+ gal of Lucas Blue Thunder 70 wt. synthetic in a drum, we used 10 gal. changing brands. $400 obo
can deliver to Pomona or MM, SOLD
1 pair M/T...
They have been out of business for years, call Strange Eng
CS2 Lenco 4 speed, air shifter, 41%,35%,25% reverse with N, reverse shifter with N safety, Stroud Blanket, need cert, input shaft 1...
What size are the lifters , wheel dia. body dia.
Nathan, We just installed a 10" gear in our fab 9" housing, notched the housing for ring gear clearance, Chrisman's machined the center...
BAE, AJP, both sell them
blow back bars
Mine have slots in the ends on the bell housing, can move about 3/8". clevises on the chassis, have pins with a locking bail on...