Separate names with a comma.
Some people use setups that bleed off fuel, but in your case I would just chip it and go. Full tree racing, most will put the throttle down when...
Be sure you have adequate sleeve protrusion to lock them in, will need to make some holders to keep them in place when honing.
The AWA stuff sure was interesting. Are they actually doing anything?
Remember that thermocouples are extremely slow to react, can really fool you.
Weight is forward, but low
You knew Mike would say to read the plugs. Most people have found O2 readings to be erratic at best on blown applications, although they are...
Like Remo said in Casino "Why take a chance?"
Sounds like a chance for "Hey y'all, watch this".
Just curious, what does the trans builder suggest?
Probably not repairable, might keep as emergency spare, it was running when you took it out.
Cracks in the radius? Clearly visible with mag?
The storage environment is most important. In a heated/cooled situation I would just back off the valve springs and lightly cover to keep the...
We have tig welded some minor dings, then dressed them by hand, and has worked.
Looking for Brad std or +.1 block or short block
e-mail info firstname.lastname@example.org
A way to get a faster, cleaner warmup. Start motor, then have driver squeeze fuel shutoff until engine comes up to around 2500 rpm. If you are...
100# driver ;)
Be sure and let us know what you bought.
What we told you then was wrong, but what we tell you now is right. :p
VERY good suggestion