Separate names with a comma.
Does your line pressure go up when you command the 2nd stage lockup?
sent you friend request on FB. Jeff Miller
How much co2 pressure do you have going to the lockup accumulator?
You should have 250# that way when you turn 2nd stage of the lockup on your...
What was the pressure on 2 step and with lockup on?
have you taken converter apart to check clutches?
Check with Visner Engine Development they make some
We ran a 2 speed Lockup 400 with 1.48 first and was very reliable. Tried a 1.51-1.25 3 speed and didn’t pick up any.
But starting a new build i...
Miss Holbrook retired and sold the building so Andy Pinkerton has taken over and moved everything to Alabama under new name “Skippy Performance”...
No problem with using regular 4 magnet wheel we been using them with Holley and FuelTech running individual coil ignition absolutely no issues
does anyone know who’s still making the z gap rings? I had the guys number but can’t find it or name.
What retainers are you using?
Had same issue using retainers that had Stoppard the bottom. The keepers were hitting the stop in the retainers and...
I am looking for one of the original Racepak ride hight sensors (yellow one)
Do you have a blower bag for Screw Blower?
I have 2 Bryant cranks just checked $1200 each
i have a late model PSI D Rotor available with billet front cover. Blower has 10 passes since NEW male rotor and complete rebuild including...
PSI C rotor forsale with Snout, 1 new upper pulley, 1 used upper pulley, spare quill shaft. Was last serviced by Cantrell. $13,500
We did it with twin 91mm turbos on a 526 Hemi and also 498 Hemi with d-rotor screw 108 over
I saw a post saying you had a TFX block that was windowed that you wanted to sell. Do you still have it?
Thanks Jeff Miller
I ran 2 speed 400 1:48 first 4:30 rear @ 3000 1.0-1.02 60ft with a 34.5
You may rethink your tire I have had issues with that tire on heavy cars...
Can you send me photos of the hats and contact info please
Yes the top fuel hoops will help alot. Kevin Mullins at TKM Performance in Denton NC does them on all the high boost motors