Separate names with a comma.
Not sure what you are comparing since to the best of my knowledge the A/Fuel funny car thing was canceled. I think it would add some new blood to...
Looking for rockwell tester for clutch disc. Working with A/fuel team that is just getting started and need fo find economical way to check...
Running the M's is your problem I am pretty sure. I have cpl dozen sets of M's and we still had to buy the V's because M's will not live in A/fuel
Which bearing are you running? I know with Clevitte we run V series.The M's we ram with blower are too soft.
Working with a new A/fuel team. Getting some parts together for a new motor. I know what use to top stuff,KB not making cranks so looking for...
sounds like a lot of work and cost .Especially when compared to a good used block. A fella who helped us this year does block machine work and...
If you are running out of pump with 15 and going to a 18 It would seem all you need is proper jetting. If you need the pump sizer it would seem...
While maybe works with NA engine. I think chamber pressures that are lot higher would test these pistons in away that they can only use. Having...
So changing rods and new ones a heavier. Old Brooks 88 and going to MGP. Mgps are about 70 grams heavier even atr .020 shorter. Figuring...
Not sure about a list. I know with mine.On hot days I will get dizzy and feels like all the blood is flushing out my head. I have had to limit...
Tuest statment so far. Nitro is addictive like drugs. You start out small and if not carefull you endup on 95% and craving your next fix.
anybody know nif crank trigger is required to run grid and control timing?
IMO do not get over hung up on numbers. Boost is just a referance tool. Lots of things play into it. Valve size,cam design ,head flow and temp of...
Biggest challange to nitro is stopping the percentage.Once you try it you will want more.
WELL WITH NEW RODS i WILL HAVE .020 EXTRA PISTON TO HEAD. Already running .050/ I had a set of .030 but can't find them. Obly copper I can find to...
I know I can go lot thinner than .050. Have ran .040 with 50 lbs boost. So no boost. Have friend who can cut me a set and thinking about .020 set....
Ok misleading heading. I am trying to find out how thin a head gasket I can get by with. I bought a set of rods that are .020 shorter than I have....
I have run my injected aka not nlown Hemi at 30% and actually had to lean motor a little bit. Et dropped .27 with 30 and would have probably...
popints box and coild for 44 and if so does box have chip? Looking for backuo w/o chip.
New team well new to A/fuel side of top Alcohol. LRC racing owned By Larry Cleary and driven by brad McBride Has made major moves this year since...
