Separate names with a comma.
Everything is better with rpm, except your valve train. Some funny car guys run a lot of GPM and don’t pull timing. It’s all about what your setup...
Thanks for the heads up it got caught in my spam filter. Happen to have any pics of the piston? What heat range? You could aim the two outers...
I sent you a private message.
You sure get into some stuff. I know that the big show cars stagger the gap to the center of the cylinder so they would be facing each other and...
There’s nothing wrong with going back with the Goodyears. Some folks like the Hoosier and some top dragster guys like the Mickey “big bubba”. The...
Just an fyi, electrimotion command modules can be configured to run the coil near plug deal.
Would you be allowed a trans brake? Again, I would consult a converter company of your choice and see what they recommend not only converter but...
So your not allowed to use a two step or an air throttle? What’s debatable with a timing controller? What’s the rules state about converter dumps?...
Anyone have a vendor for some KB Oldsmobile or have a company that would be able to make a custom set? I’m trying to piece one of our blocks...
You referring to something like in this picture? That’s not my photo, I don’t even know where I gotten it from. If that’s what your looking for,...
Super glue. It just needs to stay into the head until you bolt it on and it can crush the gasket into the recess in the sleeve. It’s important to...
6061, you just have to make sure you crush the washer good. It seems that if you pre crush the washer that they tend to come loose.
Did the price double when you mentioned Mikes name?
Loaded question. Depends on where your running, your clutch and the amount of overdrive. Generally somewhere between 1.60 and 1.70.
The leak down was always a reference point anyways. The GPM is a more accurate way to measure it. In the end, it’s whatever works for your...
The star racing belts hang in pretty good.
You can do it two different ways. Open the software with the SD card plugged into the computer and click save as from the drop down menu at the...
Does the box have voltage? You can see if it’s powered up by the screen. Is it a newer box or an older box? Does it have safety box tethers on the...
I have very little hands on nitrous experience and is the hardest of all the combos to manage in my opinion. A nitrous engine can only consume so...
I got a set of 1.27 CH pistons with a 1.094 pin and there is like no room between the bottom side of the valve relief and the top of the rod....
